CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher

1

2

MODEL EST REAR VIEW  

Models EST-AH , EST-C  

EST-AH-(EXT)  

& EST-C-(EXT)  

Quick Setup  

HARD WIRE  

POWER SUPPLY  

TUBE  

3

3

STIFFENER  

Instructions  

WARNING: Electrical and  

plumbing connections  

need to be made by a  

licensed service person  

and comply with all  

CHEMICAL  

TUBING  

Federal, State and Local  

NORMAL-OFF DELIMER  

Health, Electrical,  

SWITCH  

Plumbing and Safety  

codes.  

ON/OFF  

POWER SWITCH  

1/2" WATER  

1

INLET  

2" DRAIN  

OUTLET  

2

STEP  

STEP  

STEP  

WHITE  

BLUE  

RED  

1

3

2

8"  

WALL  

DRAIN  

FLOOR DRAIN  

Connect a 2" drain pipe (not  

supplied) from scrap accumulator  

to floor or wall drain.  

Insert tube stiffener with chemical tubing  

into each corresponding chemical  

dispensers.  

Connect dishmachine to hot water source  

recommended 140 temperature (120  

minimum temperature required).  

PN: 10130.13  

07-2021  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher
Make	CMA Dishmachines
Language	English
Filetype	PDF (Download)
File size	0.31 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• CMA Dishmachines

CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher Overview

Summary of Contents

• Page 1: Model EST rear view includes models EST-AH, EST-C, EST-AH-(EXT), and EST-C-(EXT). Quick setup instructions are provided for hard wiring and power supply. Electrical and plumbing connections must be made by a licensed service person and comply with all federal, state, and local codes. The normal-off delimer switch and on/off power switch are included in the setup. A 1/2 water inlet and a 2 drain outlet are specified for the installation. A 2 drain pipe must be connected from the scrap accumulator to a floor or wall drain. Chemical tubing should be inserted with a tube stiffener into each corresponding chemical dispenser. The dishmachine needs to be connected to a hot water source with a recommended temperature of 140°F (120°F minimum required). The document includes a part number and a date reference.
• Page 2: Model EST front view includes models EST-AH, EST-C, EST-AH-(EXT), and EST-C-(EXT). Electrical and plumbing connections need to be made by a licensed service person and comply with all federal, state, and local health, electrical, plumbing, and safety codes. The models EST-AH and EST-C are shipped without a thermometer installed. To prevent leaking, the installation team will need to install the thermometer using Teflon tape. The thermometer is shipped inside the dishwasher, zip-tied to the dishrack. Level the dishmachine by adjusting the leveling legs to ensure proper performance. Open dishmachine doors completely; closing them will automatically activate the machine. Press the FILL/START switch and hold in the FILL position until the water overflows into the scrap accumulator. The document includes a warning regarding electrical and plumbing connections. The installation instructions emphasize the importance of proper leveling for optimal performance.