Home > Electrolux > Electrolux ESA47205SX Dishwasher
Electrolux ESA47205SX Dishwasher
Regardless of the type of detergent used,
set the proper water hardness level to
keep the salt refill indicator active.
additional 4 litres and the total energy
consumption of a programme by additional 2
Wh. The rinsing of the softener ends with a
complete drain.
Each performed softener rinse (possible more
than one in the same cycle) may prolong the
programme duration by another 5 minutes
when it occurs at any point at the beginning
or in the middle of a programme.
Multi-tabs containing salt are not effective
enough to soften hard water.
Regeneration process
For the correct water softener operation, the
resin of the softener device needs to be
regenerated regularly. This process is
automatic and is the part of the normal
dishwasher operation.
All the consumption values mentioned in
this section are determined in line with
the currently applicable standard in
laboratory conditions with water hardness
2.5mmol/L (water softener: level 3)
according to the regulation: 2019/2022 .
The pressure and the temperature of
water as well as the variations of the
mains supply can change the values.
When the prescribed quantity of water (see
values in the table) has been used since the
previous regeneration process, a new
regeneration process will be initiated between
the final rinse and the programme end.
Water softener level Amount of water (l)
1
2
250
100
62
47
25
17
10
5
How to set the water softener level
Make sure the appliance is in user mode.
3
1. Press
.
4
•
•
•
The indicator
still flashes.
The remaining indicators are off.
5
The display shows the current setting:
6
e.g.
= level 5.
7
2. Press repeatedly to change the setting.
3. Press the on/off button to confirm the
setting.
8
9
3
10
3
7.3 The rinse aid empty notification
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically
released during the final rinse.
In case of the high water softener setting, it
may occur also in the middle of the
programme, before the rinse (twice during a
programme). Regeneration initiation has no
impact on the cycle duration, unless it occurs
in the middle of a programme or at the end of
a programme with a short drying phase. In
such cases, the regeneration prolongs the
total duration of a programme by additional 5
minutes.
When the rinse aid chamber is empty, the
rinse aid indicator turns on. If the drying
results are satisfactory while using multi-
tablets only, you can deactivate the
notification for refilling the rinse aid. However,
for best drying performance, always use rinse
aid.
Subsequently, the rinsing of the water
softener that lasts 5 minutes may begin in the
same cycle or at the beginning of the next
programme. This activity increases the total
water consumption of a programme by
If standard detergent or multi-tablets without
rinse aid are used, activate the notification to
keep the rinse aid refill indicator active.
12 ENGLISH
| General | Details |
|---|---|
| Name | Electrolux ESA47205SX Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.84 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
FISHER AND PAYKEL DD60ST4NX9 Single DishDrawer Dishwasher
BOSCH SMS4HMI00G Free-Standing Dishwasher
BOSCH SMV4EVX14E Fully Dishwasher
BOSCH SMV4EB804E Dishwasher
Magic Chef MCSCD3W 18 Inch Full Console Dishwasher
FISHER AND PAYKEL DD24SDFTX9 N Dish Drawer Dishwasher
KLEENmaid DW4531 45cm Dishwasher
BOSCH SMS4HAW40G Dishwasher
BOSCH SHX53CM5N Bar Handle Dishwasher
FISHER and PAYKEL DD24SCTB9 N Dishwasher