Home > Element > element ENB5322HECW Dishwasher

element ENB5322HECW Dishwasher

DRAIN AIR GAP  
Check the drain air gap anytime your dishwasher isn’t draining well.  
Some state or local plumbing codes require the addition of a drain air  
gap between a built-in dishwasher and the home drain system. If a drain  
is clogged, a drain air gap prevents water from backing up into the  
dishwasher.  
The drain air gap is usually located on top of the sink or countertop near  
the dishwasher.  
NOTE: The drain air gap is an external plumbing device that is not part of  
your dishwasher. The warranty provided with your dishwasher does not  
cover service costs directly associated with the cleaning or repair of the  
external drain air gap.  
To Clean the Drain Air Gap:  
Clean the drain air gap periodically to ensure proper drainage of  
your dishwasher. Follow the cleaning instructions provided by the  
manufacturer.  
With most types:  
1. Turn off the dishwasher.  
2. Lift off the metal cover, and then unscrew the plastic cap.  
3. Clean the plastic cap with a toothpick.  
STORING  
STORING FOR THE SUMMER  
Protect your dishwasher during the summer months by turning off the  
water supply and power supply to the dishwasher.  
WINTERIZING YOUR DISHWASHER  
Protect your dishwasher and home against water damage caused by  
freezing water lines. If your dishwasher is left in a seasonal dwelling or  
could be exposed to near freezing temperatures, have your dishwasher  
winterized by authorized service personnel.  
Prepare for Storage:  
1. Turn off electrical power to the dishwasher.  
2. Turn off the water supply.  
3. Place a pan under the inlet valve, and then disconnect the water line  
from the inlet valve.  
4. Disconnect the drain line from the pump and drain water into the pan.  
30  
Prepare for Use:  
1. Reconnect the water, drain and electrical power supply.  
2. Turn on water and electrical power supply.  
3. Fill detergent cup and run the dishwasher through a heated wash  
cycle.  
4. Check the connections for leaks.  
TROUBLESHOOTING  
DISHWASHER NOT OPERATING PROPERLY  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
Dishwasher  
does not  
There is no power to the  
dishwasher.  
Replace fuse or reset  
circuit breaker.  
run or stops  
during a cycle  
The door is not closed  
tightly and latched.  
Close and latch the door.  
Most cycles pause for  
5 minutes near the start  
This is normal, and reduces  
the energy required to  
of a cycle to let the dishes clean the dishes.  
soak.  
Certain cycles repeatedly  
pause for 15 to 65 seconds  
during the main wash.  
This is normal.  
The Delay feature is  
selected.  
To reset, see “Options” in  
the Controls section.  
Deactivate Control Lock.  
See “Additional Features”  
in the Controls section.  
Control Lock feature is  
activated.  
Dishwasher  
does not start  
a cycle  
Dishwasher  
will not fill  
The water shutoff valve is  
not turned on.  
Turn on the water valve.  
Close and latch the door.  
The door is not closed  
tightly and latched.  
Water pressure is too low. Verify a minimum of  
20 psi water pressure is  
maintained during the  
filling operation.  
31  
GeneralDetails
Nameelement ENB5322HECW Dishwasher
MakeElement
LanguageEnglish
FiletypePDF (Download)
File size5.81 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
element ENB5322HECW Full Console Dishwasher
element ENB5322HECW Full Console Dishwasher
element ENB6631PEBB 18 Inch Dishwasher
element ENB6631PEBB 18 Inch Dishwasher
element ENB6632PEBB Dishwasher
element ENB6632PEBB Dishwasher

element ENB5322HECW Dishwasher