element ENB5322HECW Dishwasher
PROBLEM
POSSIBLE CAUSE
SOLUTION
Spotting and
filming on dishes
(cont.)
Detergent is too old. Detergent must be fresh and
dry to be effective. Store
detergent in a cool, dry area.
Home water
Water pressure to the home
should be 20 to 80 psi
(138 to 552 kPa) for proper
dishwasher fill. A booster
pump on the water supply
can be added if pressure is
too low.
pressure is too low
to fill dishwasher
properly.
Silica film or
etching
Using too much
detergent
If you have soft water use
less detergent, but do not
use less than 1 Tbsp. (15 g)
per load.
The inlet water
temperature
exceeds 150°F
(65°”C).
Lower the incoming water
temperature.
Black or gray
marks on dishes
Aluminum items
rubbing dishes
during washing.
Disposable
Hand wash aluminum items.
Remove aluminum markings
by using a mild abrasive
cleaner.
aluminum items
can break down in
the dishwasher and
cause marking.
Orange stains
on plastic dishes
or dishwasher
interior
Large amounts of Use a stain removal product
tomato-based foods to remove stains from
on dishes placed in
the dishwasher.
your dishwasher. Stains
will not affect dishwasher
performance.
DISHES DO NOT DRY COMPLETELY
PROBLEM
POSSIBLE CAUSE
SOLUTION
Dishes are not
completely dry
Dishes are not
loaded properly
to allow water
drainage.
Do not overload dishwasher.
Place glasses and cups in
the rack so that the bottom
surface is slanted to allow
water to run off.
NOTE: Plastics
often need towel
drying.
Rinse Aid not used
or dispenser is
empty.
Use a liquid rinse aid to
speed drying and keep the
dispenser full.
Used an air dry
or energy-saving
option.
For dryer dishes, select a
Cycle that allows a Heated
Dry option.
35
| General | Details |
|---|---|
| Name | element ENB5322HECW Dishwasher |
| Make | Element |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.81 MB |

element ENB5322HECW Full Console Dishwasher

element ENB6631PEBB 18 Inch Dishwasher

element ENB6632PEBB Dishwasher




















































