Home > Element > element ENB5322HECW Dishwasher

element ENB5322HECW Dishwasher

OPERATING REQUIREMENTS  
ELECTRICAL REQUIREMENTS  
WARNING  
Electrical Shock Hazard  
Electrically ground dishwasher.  
Connect ground wire to green ground connector in terminal box.  
Do not use an extension cord.  
Failure to follow these instructions can result in death, fire, or  
electrical shock.  
This dishwasher is designed for operation on an adequately wired  
individual 120 V, 60 Hz, 15- or 20-amp fused electrical supply with copper  
wire only. It is recommended that a time-delay fuse or circuit breaker is  
used, and that a separate circuit serving only this appliance is provided. If  
an outlet is used, the outlet should be placed in adjacent cabinet.  
LOCATION REQUIREMENTS  
Install where dishwasher is protected from the elements. Protect  
against freezing to avoid possible rupture of fill valve. Such ruptures  
are not covered by the warranty. For winter storage information, see  
“Storing” in the “Dishwasher Care” section.  
Install and level dishwasher on a floor that will hold the weight and in  
an area suitable for its size and use.  
WATER SUPPLY REQUIREMENTS  
The water supply temperature should be 120°F to 150°F (49°C to  
66°C).  
The water supply must maintain water pressure between 20 and 80 psi  
for sufficient flow.  
7
GeneralDetails
Nameelement ENB5322HECW Dishwasher
MakeElement
LanguageEnglish
FiletypePDF (Download)
File size5.81 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
element ENB5322HECW Full Console Dishwasher
element ENB5322HECW Full Console Dishwasher
element ENB6631PEBB 18 Inch Dishwasher
element ENB6631PEBB 18 Inch Dishwasher
element ENB6632PEBB Dishwasher
element ENB6632PEBB Dishwasher

element ENB5322HECW Dishwasher