FORTE F18DWS250SS 18 Inch Dishwasher
INSTALLATION PREPARATION
DRAIN PREPARATION
Method 2 - High Drain with Waste Tee or Disposer Provide a method
to attach drain hose to underside of countertop.
The type of drain installation depends on answers to the following
questions:
Do local codes or ordinances require an air gap?
Will waste tee or disposer connection be less than 18” above
the floor?
32"
Will installation have a drain loop less than 32” above floor?
32"
Min.
Min.
18"
Min.
18"
Min.
If the answer to ANY of the 3 questions above is YES, Method 1
MUST be used. Otherwise either Method 1 or Method 2 may be used.
Figure C or Figure D.
CAUTION:
Figure C
Install waste tee or disposer and air gap according to manufacturer’s
instructions.
An air gap MUST BE USED if the drain hose is connected to
waste tee or disposer lower than 18" above the floor.
Failure to provide the proper drain connection height with air
gap or 32" minimum, high drain loop will result in improper
draining of the dishwasher.
CABINET PREPARATION
Drill a 1-1.5” dia. hole in the cabinet wall within the shaded areas
shown in Figure A for the drain hose connection. The hole should
be smooth with no sharp edges.
Method 1 - Air Gap with Waste Tee or Disposer
6
Figure B
| General | Details |
|---|---|
| Name | FORTE F18DWS250SS 18 Inch Dishwasher |
| Make | FORTE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.71 MB |

Forte F24DWS650PR Dishwasher

FORTE F18DWS450PR Dishwasher

FORTE F24DWS450PR Dishwasher






























