FORTE F18DWS250SS 18 Inch Dishwasher
INSTALLATION PREPARATION
Water Line Connection
PREPARE HOT WATER LINE AND
POWER CORD HOLE
Turn off the water supply.
Install a hand shut-off valve in an accessible location, such
as under the sink. (Optional, but strongly recommended
and may be required by local codes.)
The line may enter from either side, rear or floor within the shaded
area shown in Figure F.
Each cut an additional 1-4/5” dia. hole to accommodate the water
line and the power cord.
Connect one end of inlet line(A) to the 3/4-inch FHT(B) and
connect to the dishwasher.
Run the other end of the inlet line through the hole in the
cabinet. If the shut-off valve is 3/8 inch I.D., the inlet line
can be directly connected to the shut-off valve.
Adjust water heater for 120°F to 150 °F temperature.
Flush water line to clean out debris.
The hot water supply line pressure must be 6-145 PSI.
CAUTION:
1-4/5" Dia.
Hole
1-4/5" Dia.
Hole
Shut-off
Valve
Hot
A
B
Opening the door will cause the dishwasher to tip forward. Do
not open the door until you are ready to install the dishwasher.
If it is necessary to open the door, hold the top of the
dishwasher securely with one hand and hold the door with the
other hand.
Cabinet Face
Figure F
8
| General | Details |
|---|---|
| Name | FORTE F18DWS250SS 18 Inch Dishwasher |
| Make | FORTE |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.71 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Forte F24DWS650PR Dishwasher
FORTE F18DWS450PR Dishwasher
FORTE F24DWS450PR Dishwasher
BOSCH SMH4EVX00E Dishwasher
BOSCH SMV8ZCX07E Total Dishwasher
FISHER AND PAYKEL DD24DTX6I Dishdra Wertm Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
BOSCH SMI6ZDS16E Dishwasher
hermitlux HMX-TDJ03 Tabletop Dishwasher
BOSCH SMV50M00EU Dishwasher
Electrolux ESL424 Dishwasher
COOKOLOGY CFSD613WH Dishwasher
Gaggenau DF480101F Dishwasher