Home > Frigidaire > FRIGIDAIRE FDPH4316A Dishwasher
FRIGIDAIRE FDPH4316A Dishwasher
16
TROUBLESHOOTING
•
Cups with a concave bottom will
collect water. Load them at the far
left and right of the upper rack so
they will be held in a tilted position.
Before You Call
Review this list before calling for service.
It may save you both time and expense.
This list includes common experiences
that are not the result of defective
workmanship or material in your
dishwasher.
Drying Tip
•
Select the Normal Wash and High
Temp option along with a Rinse
Aid agent for improved drying
performance.
Food Soils Left on Dishes
•
•
•
Choose another cycle for longer
washing time.
•
Containers, bowls, pots/pans, and
any dishware with concave surfaces
that can collect water should be
placed in the rack facing or angled
down so that water is able to drain
even from the lowest point.
Check rack loading section for proper
loading-avoid nesting items.
Home water pressure may be too
low-should be 20 to 120 pounds per
square inch (psi).
•
Plastic items may need to be towel
dried.
•
•
Check incoming water temperature.
It should be about 120oF (49oC). (See
Factors Affecting Performance).
Glassware/Flatware Spotted or Cloudy
•
Check water hardness. For extremely
hard water, it may be necessary
to install a water softener. (See
Detergent Chart).
Check water hardness. For extremely
hard water, it may be necessary
to install a water softener. (See
Detergent Chart).
•
Water temperature may be low.
Avoid extremely low or high
temperatures. (See Factors Affecting
Performance).
•
•
Use Fresh Detergent.
Make sure items are not blocking the
spray arms, preventing them from
rotating.
•
•
Avoid overloading and improper
loading. (See Preparing and Loading
Dishes).
•
•
Do not overload the dishwasher (See
Preparing and Loading Dishes).
Check to verify that the glass trap
is maintained and installed properly
(See Care and Cleaning).
Use fresh detergent. Old detergent
is ineffective.
•
•
Make sure rinse aid dispenser is filled.
Dishes not Dry
Check to see that proper amount
of detergent is being used for cycle
selected. (See Detergent Dispenser).
• If you have not selected Max or Heat
Dry, and no LEDs are illuminated for
these Options, then the heater has
been de-activated during the drying
phase of the selected Wash Cycle. This
is known as Air Dry. Air Dry slightly
lowers the energy usage but increases
the likelihood that the dishware will not
be completely dried.
•
Home water pressure may be too
low-it should be 20 to 120 pounds
per square inch (psi).
Dishware Chipped
•
Load with care and do not overload.
(See Preparing and Loading Dishes).
•
Selecting Heat Dry, High Temp or
Sanitize Temp options will improve
drying performance.
•
•
Place delicate items in top rack.
Place glasses securely against pins
and not over pins.
•
•
•
Make sure the rinse aid dispenser is
filled.
•
•
•
Load items so they are secure and
don’t jar loose when moving racks in
and out. Move racks in and out slowly.
Increase the discharge setting of rinse
aid. (See Rinse Aid).
Make sure tall glasses and stemware
will clear top of tub when rack is
pushed in.
Check the incoming water
temperature. Be sure it is at least
120oF (49oC).
Fine antique china and crystal should
be hand-washed.
•
Check for proper loading-avoid
nesting items.
| General | Details |
|---|---|
| Name | FRIGIDAIRE FDPH4316A Dishwasher |
| Make | Frigidaire |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.62 MB |

FRIGIDAIRE GDPH4525SS Dishwasher

FRIGIDAIRE GDPP4517A Gallery Series Dishwasher

FRIGIDAIRE FDPC4314AS Dishwasher

FRIGIDAIRE GDPH4515AF Gallery Dishwasher

FRIGIDAIRE FFBD2406NB Full Console Dishwasher

FRIGIDAIRE GDPH4525AF Gallery Dishwasher

FRIGIDAIRE FDHP4336AS 24 Tall Tub Dishwasher

FRIGIDAIRE FDHP4336AS Dishwasher

FRIGIDAIRE FDSR4501AP Panel Ready Dishwasher

FRIGIDAIRE FFBD1821MS Dishwasher

































