GAGGENAU DF211701 200 Series 24 Dishwasher
en-usꢀTroubleshooting
Issue
Cause and troubleshooting
There are stubborn white coatings ▶ Adjust the sensitivity of the sensors.
on the dishware, inside the
appliance or on the door.
Tea residue or lipstick marks on
dishware.
Dishwashing temperature is too low.
▶ Select a program with a higher dishwashing temperature.
Too little detergent is being used or is unsuitable.
▶ Use a suitable Detergent and follow the manufacturer's instructions for the
amount to be used.
Dishware has been precleaned too intensively. Then the sensors choose a lighter
cycle. Stubborn remnants cannot be entirely removed.
▶ Only remove large remnants of food and do not pre-rinse dishware.
▶ Adjust the sensitivity of the sensors.
There are colored coatings (blue,
The formation of films is due to substances contained in vegetables (cabbage,
yellow, brown) inside the appliance celery, potatoes, noodles, etc.) or tap water (manganese).
or on stainless steel dishware that
are difficult or impossible to
remove.
▶ Clean the appliance.
cleaning product. It may not always be possible to completely remove coatings
but they are harmless to health.
The formation of films is due to metal components on silver or aluminum dishware.
▶ Clean the appliance.
cleaning product. It may not always be possible to completely remove coatings
but they are harmless to health.
There are colored deposits (yellow, The formation of films is due to ingredients of food remnants and tap water
orange, brown) that are ey to
remove inside the appliance
(mainly at the bottom).
(limescale), "soaplike".
1. Check the setting of the water softening system.
2. Add special salt.
3. If you are using combined detergents (tabs), activate the water softening system.
Follow the information on detergents.
Plastic parts inside the appliance
are discolored.
Plastic parts inside the appliance may become discolored over the life of the
dishwasher.
▶ Discoloration may come about and will not impair functioning of the appliance.
Plastic parts are discolored.
Dishwashing temperature is too low.
▶ Select a program with a higher dishwashing temperature.
Dishware has been precleaned too intensively. Then the sensors choose a lighter
cycle. Stubborn remnants cannot be entirely removed.
▶ Only remove large remnants of food and do not pre-rinse dishware.
▶ Adjust the sensitivity of the sensors.
There are removable streaks on
glasses, glassware with a metallic
appearance and silverware.
Amount of rinse aid to be dispensed is set too high.
▶ Set the rinse aid system to a lower setting.
No rinse aid has been added.
▶ Add rinse aid.
There is detergent residue in the final rinse. Lid of detergent dispenser is blocked by
dishware and will not open fully.
34
| General | Details |
|---|---|
| Name | GAGGENAU DF211701 200 Series 24 Dishwasher |
| Make | Gaggenau |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.95 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Gaggenau DF264101 Dishwasher
GAGGENAU DF271101F Dishwasher
GAGGENAU DF481100 Dishwasher
GAGGENAU 400 Dishwasher
GAGGENAU DF480161F Dishwasher
Gaggenau 9001923384 B Dishwasher
GAGGENAU DF261101 Dishwasher
Gaggenau DF211700 Dishwasher
GAGGENAU DF480701F Dishwasher
GAGGENAU DF481100F 400 Series Dishwasher
