Home > GERMAN POOL > GERMAN POOL 450 Series Dishwasher
GERMAN POOL 450 Series Dishwasher
Installation Instructions
Installation Instructions
Step 2. Aesthetic panel’s dimensions and installation
Step 3. Tension adjustment of the door spring
The aesthetic wooden panel could be processed according to the installation drawings.
1. The door springs are set at the factory to the proper tension for the outer door. If aesthetic wooden
panel are installed, you will have to adjust the door spring tension. Rotate the adjusting screw to
drive the adjuster to strain or relax the steel cable.
Full-integrated model
Install the hook on the aesthetic wooden panel* and put the hook into the slot of the outer door of
dishwasher(See figure A). After positioning of the panel , attach the panel onto the outer door by screws
and bolts(See figure B).
2. Door spring tension is correct when the door remains horizontal in the fully opened position, yet
rises to a close with the slight lift of a finger.
1.Take away the four short screws
A
B
2.Pin up the four long screws
Step 4. Dishwasher installation steps
Note: Please refer to the specified installation steps in the installation drawings.
* Aesthetic wooden panel is not a supplied accessory of the dishwasher. Please contact your kitchen
cabinet supplier to purchase an aesthetic wooden panel.
1. Affix the condensation strip under the work surface of cabinet. Please ensure the condensation strip
is flush with edge of work surface.
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
5. Place the dishwasher into position.
6. Level the dishwasher. The rear can be adjusted from the front of the dishwasher by turning the
Allen screw in the middle of the base of dishwasher use an Allen key. To adjust the front feet, use a
flat screw driver and turn the front feet until the dishwasher is level.
7. Install the furniture door to the outer door of the dishwasher.
8. Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to tighten
the left and right door springs. Failure to do this could cause damage to your dishwasher.
9. The dishwasher must be secured in place. There are two ways to do this:
A. Normal work surface: Put the installation hook into the slot of the side plane and secure it to the
work surface with the wood screws.
B. Marble or granite work top: Screw on the side.
P.18
P.19
| General | Details |
|---|---|
| Name | GERMAN POOL 450 Series Dishwasher |
| Make | GERMAN POOL |
| Language | English |
| Filetype | PDF (Download) |
| File size | 6.37 MB |
(1 votes, average: 5.00 out of 5)
Loading...
hermitlux HMX-DW03 Tabletop Dishwasher
BOSCH SX75ZX07CE Dishwasher
HEINNER HG-150SS Free Standing Dishwasher
Amica GSP 546 110 W Standing Dishwasher
TESLA WD461MX Dishwasher
GAGGENAU 8001221619 C Fully Integrated Dishwasher
FISHER AND PAYKEL DW60FC4B2 Contemporary Dishwasher
BOSCH SMH6ZCX06E Fully Integrated Dishwasher
FISHER AND PAYKEL DD60D2HNX9 Dishwasher
Whirlpool W11323304H Heavy Duty Dishwasher