Home > Hotpoint > Hotpoint H8I HP42 Dishwasher

Hotpoint H8I HP42 Dishwasher

DAILY USE  
1. CHECK WATER CONNECTION  
MODIFYING A RUNNING PROGRAM  
Check that the dishwasher is connected to the water supply and that  
the tap is open.  
If a wrong program was selected, it is possible to change it, provided  
that it has only just begun. RESET the machine: press and hold the ON/  
OFF button for more than 3. sec., and the machine will switch off. The  
dashboard will show “0:01. Switch the machine back on using the ON/  
OFF button and select the new wash cycle and any desired options. Start  
the cycle by pressing the START/Pause button and closing the door  
within 4 sec.  
2. SWITCH ON THE DISHWASHER  
Open the door and press the ON/OFF button.  
3. LOAD THE RACKS (see LOADING THE RACKS).  
4. FILL THE DETERGENT DISPENSER  
5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE  
Select the most appropriate program in accordance with the type of  
crockery and its soiling level (see PROGRAMS DESCRIPTION) by pressing  
the PREVIOUS / NEXT buttons.  
ADDING EXTRA CROCKERY  
Without switching off the machine, open the door first slightly to avoid  
water splashing out (START/Pause led starts blinking) (Caution!: Hot  
steam!) and place the crockery inside the dishwasher. Press the START/  
Pause button and close the door within 4 sec., the cycle will resume from  
the point at which it was interrupted.  
Select the desired options (see OPTIONS AND FUNCTIONS). Not all  
options are compatible with all programs.  
6. START  
Start the wash cycle by pressing START/Pause button (led is lit) and  
closing the door within 4 sec. When the program starts you hear a sin-  
gle beep. If the door was not closed within 4sec., the alarm sound will  
be played. In this case, open the door, press START/Pause button and  
close the door again within 4 sec.  
ACCIDENTAL INTERRUPTIONS  
If the door is opened during the wash cycle, or if there is a power cut,  
the cycle stops. ONLY IF YOU PRESS the START/Pause button and close  
the door within 4 sec., the cycle will resume from the point at which it  
was interrupted.  
7. END OF WASH CYCLE  
The end of the wash cycle is indicated by beeps and by the flashing of  
the wash cycle number on the display. Open the door and switch off  
the appliance by pressing the ON/OFF button.  
Wait for a few minutes before removing the crockery - to avoid burns.  
Unload the racks, beginning with the lower one.  
ADVICE AND TIPS  
TIPS  
TIPS ON ENERGY SAVING  
Before loading the baskets, remove all food residues from the crockery  
and empty the glasses. You do not need to rinse beforehand under  
running water.  
Arrange the crockery so that it is held in place firmly and does not tip over;  
and arrange the containers with the openings facing downwards and the  
concave/convex parts placed obliquely, thus allowing the water to reach  
every surface and flow freely.  
Warning: lids, handles, trays and frying pans should not prevent the  
sprayer arms from rotating.  
Place any small items in the cutlery basket.  
Very soiled dishes and pans should be placed in the lower basket because  
in this sector the water sprays are stronger and allow a higher wash-  
ing performance.  
After loading the appliance, make sure that the sprayer arms can rotate  
freely.  
• When the household dishwasher is used according to the manufactur-  
er’s instructions, washing tableware in a dishwasher usually con-  
sumes less energy and water than hand dishwashing.  
• In order to maximize dishwasher efficiency, it is recommended to  
initiate the wash cycle once the dishwasher is fully loaded. Loading  
the household dishwasher up to the capacity indicated by the manu-  
facturer will contribute to energy and water savings. Information on the  
correct loading of tableware can be found in the Loading chapter.  
In case of partial loading, it is recommended to use a dedicated wash op-  
tions if available (Half load/ Zone Wash/ Multizone), filling up only select-  
ed racks. Incorrect loading or overloading of the dishwasher may increase  
resources usage (such as water, energy and time, as well as increase noise  
level), reducing cleaning and drying performance.  
• Manual pre-rinsing of tableware items leads to increased water and  
energy consumption and is not recommended.  
UNSUITABLE CROCKERY  
• Wooden crockery and cutlery.  
• Delicately decorated glasses, artistic handicrafts and antique crockery.  
Their decorations are not resistant.  
• Parts in synthetic material which do not withstand high temperatures.  
• Copper and tin crockery.  
HYGIENE  
To avoid odour and sediment which can be accumulated in the dishwasher  
please run a high-temperature program at least once a month. Use  
a teaspoon of detergent and run it without loading to clean your appliance.  
• Crockery soiled with ash, wax, lubricating grease or ink.  
The colours of glass decorations and aluminium/silver pieces can change  
and fade during the washing process. Some types of glass (e.g. crystal  
objects) can become opaque after a number of wash cycles too.  
RESISTANCE TO FROST  
If the appliance is placed in surroundings exposed to the risk of frost, it  
must be drained completely. Turn off the water tap, remove the inlet and  
outlet hoses, and let all the water drain away. Make sure that the water  
softener is full of dissolved regeneration salt in the salt container, to  
protect the appliance from temperatures of up to -20°C.  
DAMAGE TO GLASS AND CROCKERY  
• Only use glasses and porcelain guaranteed by the manufacturer as  
dishwasher safe.  
• Use a delicate detergent suitable for crockery  
• Collect glasses and cutlery from the dishwasher as soon as the wash  
cycle is over.  
If the appliance was stored in frost conditions the appliance must remain at  
an ambient temperature of min. 5°C for at least 24 hours before the first run.  
2
GeneralDetails
NameHotpoint H8I HP42 Dishwasher
MakeHotpoint
LanguageEnglish
FiletypePDF (Download)
File size9.15 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint H7F HS41 X Dishwasher
Hotpoint H7F HS41 X Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
Hotpoint H7I HT59 L Dishwasher

Hotpoint H8I HP42 Dishwasher