Hotpoint H8I HT59 LS UK Dishwasher

1

2

3

4

5

6

Daily Reference Guide  

EN  

Before using the appliance carefully read  

Safety and Installation Instructions. More information about your  

product available on website: docs.hotpoint.eu  

THANK YOU FOR BUYING A HOTPOINT PRODUCT. In order  

to receive a more complete assistance, please register your  

appliance on: www.hotpoint.eu/register  

After installation, please remember to remove all transport  

protection parts from the dishwasher.  

CONTROL PANEL  

1

2

3

4

5

6

7

8

9

10 11  

12  

13  

14  

15  

16  

1. ON-OFF/Reset button with indicator light  

2. Eco program button with indicator light  

3. Rapid program button with indicator light/ Soak program - 3 sec. press  

4. Delicates program button with indicator light/ Self-Clean program - 3 sec. press  

5. Auto programs buttons with indicator lights - Auto Intensive 65°/ Auto Mixed 55°/  

Auto Fast 50°  

6. Salt reservoir empty indicator light  

7. Rinse Aid reservoir empty indicator light  

8. Display  

9. Program number and remaining time indicator  

10. Closed water tap indicator light  

11. DESCALE indicator light  

12. Extra options buttons with indicator lights - Half Load / Silent / Sani Rinse  

13. Zone Wash 3D option button with indicator light  

14. Extra Dry option button with indicator light / Settings - 3 sec. press  

15. Delay option button with indicator light  

16. START/Pause button with indicator light  

FIRST TIME USE  

SETTING MENU  

Water Hardness Table  

1. Switch on the appliance by pressing the ON-OFF button.  

2. Hold the Settings (Extra Dry ) button for 3 seconds, until you hear a  

beep and the display shows„SEt”.  

°dH  

German degrees  

°fH  

French degrees  

°Clark  

English degrees  

Level  

1 (Soft)  

3. After one second the first available setting (letter„h”) will be displayed.  

4. Press Autoprograms /Extra options buttons to scroll through the list  

0 - 6  

7 - 11  

0 - 10  

11 - 20  

21 - 29  

30 - 60  

61 - 90  

0 - 7  

8 - 14  

2 (Medium)  

3 (Average)  

4 (Hard)  

of available settings (see table below), then press START/Pause  

view and change the value of the currently selected setting.  

to  

12 - 16  

17 - 34  

35 - 50  

15 - 20  

21 - 42  

43 - 62  

5. Press Auto programs /Extra options to change the value, then press  

START/Pause to save the new value.  

6. To change another setting, repeat points 2 and 5.  

7. Press ON-OFF or wait 30 seconds to exit the menu.  

5 (Very hard)  

WATER SOFTENING SYSTEM  

VALUES  

(Default - in bold)  

LETTER  

SETTING  

Water softener automatically reduces water hardness, consequently preventing  

scale buildup on the heater, contributing also to better cleaning efficiency.  

This system regenerates itself with salt, therefore it is required to refill  

the salt container when empty. The frequency of regeneration depends  

on the water hardness level setting - regeneration takes place once per 4-6  

Eco cycles with the water hardness level set to 3. The regeneration process  

occurs at the beginning of the cycle with additional fresh water.  

Water Hardness Level  

(see “SETTING THE WATER HARDNESS”  

and “WATER HARDNESS TABLE”)  

Rinse Aid Level  

(see “ADJUSTING THE DOSAGE OF RINSE AID”)  

1 | 2 | 3 | 4 | 5  

0 | 1 | 2 | 3 | 4 | 5  

•

•

•

Single regeneration consumes: ~3L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

ActiveDry (see “OPTIONS AND FUNCTIONS”)  

“1”= On, “0”= Off  

1 | 0  

1 | 0  

1 | 0  

Light on the floor (see “OPTIONS AND FUNCTIONS”)  

“1”= On, “0”= Off  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be  

filled when the RINSE AID REFILL indicator light in the control panel is lit.  

1. Open the dispenser  

Sound  

“1”= On, “0”= Off  

Factory Settings  

B

by  

pressing and pulling up the  

tab on the lid.  

Press START/Pause to restore to the factory  

default all the values of the settings included  

in the settings menu.  

-

2. Pour in the rinse aid (max.110  

ml), making sure it does not  

overflow from the dispenser.  

If this happens, clean the spill  

immediately with a dry cloth.  

FILLING THE SALT RESERVOIR  

The use of salt prevents the formation of LIMESCALE on the dishes and on  

A

B

the machine’s functional components.  

The salt reservoir is located in the lower part of the dishwasher (under the  

lower rack on the left side).  

3. Press the lid down until you hear a click to close it.  

NEVER pour the rinse aid directly into the appliance tub.  

•

•

•

It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.  

ADJUSTING THE DOSAGE OF RINSE AID  

If you are not completely satisfied with the drying results, you can adjust  

the quantity of rinse aid used.  

To change, follow instructions in the section “SETTING MENU”.  

If the rinse aid level is set to ZERO, no rinse aid will be supplied. The LOW  

RINSE AID indicator light will not be lit if you run out of rinse aid.  

A maximum of 6 levels can be set according to the dishwasher model.  

• If you see bluish streaks on the dishes, set a low number (0-3).  

• If there are drops of water or limescale marks on the dishes, set  

a mid-range number (4-5).  

It is important to set the water hardness.  

Salt must be filled when the SALT REFILL indicator light  

trol panel is lit.  

on the con-  

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Position the funnel (see figure) and fill the salt reservoir  

right up to its edge (approximately 0,5 kg); it is not un-  

usual for a little water to leak out.  

3. Only the first time you do this: fill the salt reservoir  

with water.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly so that no detergent can get into  

the container during the wash program (this could damage the water  

softener beyond repair).  

FILLING THE DETERGENT DISPENSER  

To open the detergent dispenser use the opening device C. Introduce  

the detergent into the dry dispenser D only. Place the amount of  

detergent for pre-washing directly inside the tub.  

1. When measuring out the detergent refer to the  

mentioned earlier information to add the proper  

quantity. Inside the dispenser D, there are indica-  

Run a program every time as soon as you completed refilling the salt  

reservoir to avoid corrosion.  

Setting the water hardness  

D

tions to help the detergent dosing.  

2. Remove detergent residues from the edges of the  

To allow the water softener to work in a perfect way, it is essential that the water  

hardness setting is based on the actual water hardness in your house. This in-  

formation can be obtained from your local water supplier. The factory setting is  

“3”. See „WATER HARDNESS TABLE”. To change, follow instructions in section  

“SETTING MENU”.  

C

dispenser and close the cover until it clicks.  

3. Close the lid of the detergent dispenser by pulling  

it up until the closing device is secured in place.  

The detergent dispenser automatically opens up at  

the right time according to the program.  

Usage of detergent not designed for dishwashers may cause  

malfunction or damage to the appliance.  

Only use salt that has been specifically designed for dishwashers.  

After the salt has been poured into the machine, the SALT REFILL indicator  

light switches off.  

If the salt container is not filled, the water softener and the heating  

element may be damaged as a result of limescale accumulation.  

Use of salt is recommended with any type of dishwasher detergent.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Hotpoint H8I HT59 LS UK Dishwasher
Make	Hotpoint
Language	English
Filetype	PDF (Download)
File size	8.93 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Hotpoint

Hotpoint H8I HT59 LS UK Dishwasher Overview

Summary of Contents

• Page 1: Daily Reference Guide Before using the appliance carefully read safety and installation instructions. Thank you for buying a Hotpoint product. After installation, please remember to remove all transport protection parts from the dishwasher. Control panel includes various buttons for different programs and indicators. First time use involves switching on the appliance and accessing the settings menu. Water softening system prevents scale buildup on the heater and improves cleaning efficiency. Rinse aid makes dish drying easier and should be filled when the indicator light is lit. The use of salt prevents the formation of limescale on dishes and the machine’s components. Adjusting the dosage of rinse aid can improve drying results based on personal preferences. It is essential to set the water hardness according to the actual water hardness in your house.
• Page 2: Check that the dishwasher is connected to the water supply and that the tap is open. If a wrong program was selected, it is possible to change it, provided that it has only just begun. Press and hold the ON/OFF button for more than 3 seconds to reset the machine. Open the door and press the ON/OFF button to switch on the dishwasher. Without switching off the machine, open the door slightly to avoid water splashing out and place the crockery inside the dishwasher. Select the most appropriate program in accordance with the type of crockery and its soiling level. If the door is opened during the wash cycle, the cycle stops. Start the wash cycle by pressing the START/Pause button and closing the door within 4 seconds. The end of the wash cycle is indicated by sound and the display shows END. To avoid odour and sediment, run a high-temperature program at least once a month.
• Page 3: Daily Reference Guide Programs table provides details on wash program durations, water and energy consumption, and available options. Eco program is suitable for normally soiled tableware and is the most efficient in terms of energy and water consumption. Rapid program is recommended for lightly-soiled dishes and does not include a drying phase. Delicates program is designed for sensitive items like glasses and cups. Auto Intensive program is for heavily soiled dishes and pans. Auto Mixed program is for normally soiled dishes with dried food residues. Soak program refreshes crockery planned for later washing without detergent. Self-Clean program is for dishwasher maintenance using specific detergents when the dishwasher is empty. Options can be selected or deselected after choosing a program, affecting time, water, or energy consumption. 3D Zone Wash provides up to 80% more water power for intensive washing in the lower rack.
• Page 4: Capacity: 14 standard place-settings Loading the racks Top rack features foldable flaps for optimizing crockery arrangement. Wine glasses can be placed safely in the foldable flaps. The top rack provides a targeted cleaning wash zone for various items. A separate arrangement of cutlery improves washing and drying performance. Knives and sharp utensils must be positioned with blades facing downwards. Lower rack is designed for pots, lids, plates, and cutlery. The lower rack has tip-up supports for versatile loading options. 3D Zone Wash uses additional water jets for intensive cleaning. Regularly clean the filter assembly to prevent clogging and ensure proper function.
• Page 5: Daily Reference Guide The lower spray arm may be removed by pulling it upwards and rotating it anti-clockwise. Cleaning the spray arms is recommended to prevent food residue from blocking the holes. The top spray arm may be removed by pressing it up and then rotating it anti-clockwise. To clean the top rack, slide it out and remove items lodged in the nozzles with tweezers. In case your dishwasher doesn’t work properly, check the troubleshooting list. Spare parts will be available for a period of either up to 7 or up to 10 years. Refill the salt reservoir if the salt indicator is lit or blinking. Descale the appliance immediately if the descale indicator is lit or blinking. The dishwasher won’t start if the door is not closed properly or if the ActiveDry pin is not pulled in. Clean the filter and descale the appliance if the dishwasher won’t drain.
• Page 6: Problems possible causes solutions No water in the water supply or the tap is closed. Make sure there is water in the water supply and the water tap is open. The dishwasher does not fill the water. Check the inlet hose. Open dishwasher door, press START/Pause button and close the door within 4 seconds. The water inlet hose is kinked. The screen in the water inlet hose is clogged; it is necessary to clean it. The filter is clogged with food residues or limescale. Clean the filter and descale the appliance. The dishwasher finishes the cycle prematurely. Check if the end of the drain hose is placed at the correct height. The detergent has not been measured out correctly or it is not suitable for use in dishwashers. An excessive amount of foam is present. Make sure the rinse aid dispenser is filled. Multifunctional tablets only will not provide as good drying effects as the actual use of liquid rinse aid. The dishes are not dried well. Make sure the cycle has ended before starting to unload the dishes. The selected cycle does not have the drying phase. Cycle without the drying phase may not deliver desired drying efficiency. Dishes and glasses are covered with limescale or a whitish film. The water hardness setting is too low.