Hotpoint H8I HT59 LS UK Dishwasher
Daily Reference Guide
EN
PROGRAMS TABLE
Duration
of wash
program
(h:min)**)
Water
Energy
Available
options *)
Programs description
consumption consumption
(litres/cycle) (kWh/cycle)
Eco 50°- Program is suitable to clean normally soiled tablewa-
re, that for this use, it is the most efficient program in terms of its
combined energy and water consumption, and that it is used to
assess compliance with the EU Ecodesign legislation.
4:00
9.5
0.64
Rapid 45° - Program is recommended for limited amount
of lightly-soiled dishes with no dried food residues. Does
not include the drying phase.
0:30 - 0:40
10.0 - 12.0
0.55 - 0.65
-
Delicates 45° - Program for delicate items, which are more
1:40 - 1:50
2:25 - 3:10
12.5 - 16.5
15.5 - 24.5
0.95 - 1.20
1.30 - 1.70
sensitive to high temperatures, for example glasses and cups.
Senses the level
Auto Intensive - 65°- Automatic pro-
gram for heavily soiled dishes and pans.
Auto Mixed - 55° Automatic program
for normally soiled dishes with dried
food residues.
Auto Fast - 50°- Automatic program
for normally and lightly soiled dishes.
The everyday cycle that ensures opti-
mal cleaning and drying performance
in shorter time.
of soiling on the
dishes and adjusts
the program accor-
dingly. When the
sensor is detecting
the soil level an
1:20 - 3:00
1:00 - 1:50
7.5 - 19.5
7.5 - 15.5
0.75 - 1.20
0.70 - 1.10
animation appears
in the display and
the cycle duration
is updated.
Soak - Use to refresh crockery planned to be washed later.
No detergent to be used with this program.
0:12
1:15
4.5
0.10
1.10
-
-
Self-Clean 65° - Program to be used to perform mainte-
nance of the dishwasher, to be carried out only when the
dishwasher is EMPTY using specific detergents designed for
dishwasher maintenance.
11.0
-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up) (see
CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will
sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
LIGHT ON THE FLOOR - A LED light projected on the floor indicates
that the dishwasher is working. The light goes off at the end of a cycle.
This feature is active by default, but it is possible to deactivate it in the
HALF LOAD - If there are not many dishes to be washed, HALF LOAD is
used to save water, electricity or time, depending on the selected program.
Remember to reduce the amount of detergent.
“SETTINGS MENU”.
SILENT - Suitable for night-time operation of the appliance.This option
can be used to limit noise emissions during wash phases. It will increase
cycle time depending on base cycle selection.
WATER TAP CLOSED – Alarm - Flashes when there is no inlet water or
water tap is closed.
DESCALE – Alarm - Limescale accumulation was detected on internal
components of the appliance. Check if Water Hardness Setting is at
SANI RINSE - This option can be used to sanitize washed dishes. It will
increase the final rinse temperature and add an antibacterial wash to
the selected program. Ideal to clean crockery and feeding bottles. The correct value and salt is present in salt container (see FIRST TIME USE), then
dishwasher door must be kept shut for the entire duration of the program
in order to guarantee a reduction of germs.
WARNING: the crockery and plates could be extremely hot at the end
of the cycle.
use a descaling product (WPro brand is recommended) with Self-Clean
program. After a successful descaling the icon will stop being displayed.
If actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display) and
then will be BLOCKED to prevent component damage, with only Self-Clean
program available. Performing a full descaling will unblock the product.
In case of extremely high amounts of limescale, descaling may have to be
performed twice to be efficient.
3D ZONEWASH - Thanks to the additional power jets this option provides
up to 80% more water power, a more intensive and powerful wash in the
lower rack, in the specific bottom area.This option is recommended for washing
pots and casseroles (please refer to the 3D loading section).
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase allows for improved drying. The EXTRA DRY
option results in the lengthening of the wash cycle.
ActiveDry - it is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying
performance every day. The door opens at a temperature that is safe for
your kitchen furniture, thus door will not be opened when the option of
SANI RINSE is on.
As additional steam protection, specially designed protection foil is added
together with the dishwasher.
To see how to mount protection foil please refer to the INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in
the “SETTINGS MENU”.
DELAY - The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
2. Press the START/Pause button and close the door within 4 sec. The timer
will begin counting down.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
SENSING - When the sensor is detecting the soil level an
animation appears (around 20 min.) in the display and the cycle
duration is updated. SENSING is for the level of soiling on the
dishes and it is present for all cycles (excepting Eco) adjusting the program
accordingly.
3
| General | Details |
|---|---|
| Name | Hotpoint H8I HT59 LS UK Dishwasher |
| Make | Hotpoint |
| Language | English |
| Filetype | PDF (Download) |
| File size | 8.93 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint H7F HS41 X Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
Hotpoint HFC 3C26 WCUK Dishwasher
ggmgastro DSHI1080WD Dishwasher
Whirlpool WDFS3R4NBSAU 14 Place Setting Dishwasher
BOSCH SPI4HMS49E Dishwasher
IKEA PROFFSIG Dishwasher
FISHER AND PAYKEL DD60D4HNB9 Drawer Dishwasher
ASKO DBI343ID.W.AU Dishwasher
BOSCH 300 Series Front Dishwasher
Hotpoint H2F HL626 Dishwasher
BOSCH 300 Series 24 Front Dishwasher
MDW 14-BS10TFT Dishwasher