Home > Insignia > INSIGNIA NS-DWRF2SS3 Front Dishwasher

INSIGNIA NS-DWRF2SS3 Front Dishwasher

PROBLEM  
POSSIBLE CAUSE  
POSSIBLE SOLUTION  
The dishwasher does  
not drain properly.  
The drain is clogged.  
Check the air gap (if so equipped).  
Make sure that the disposer is empty (if so  
connected).  
The drain hose is kinked.  
Make sure that the drain hose is not kinked and is  
properly connected.  
The garbage disposal inlet port is  
plugged.  
Check the inlet port to the disposal unit to make sure  
that it is not plugged. If a new disposal unit was  
installed, make sure its plastic inlet port is open.  
Suds in the tub  
Used the wrong type of detergent.  
The rinse aid cup is overfilled.  
Make sure that you use only detergents approved for  
automatic dishwashers.  
Add rinse aid only to the indicated fill level.  
The dishwasher leaks  
Excessive suds caused by using the  
wrong type of detergent.  
Make sure that you use only detergents approved for  
automatic dishwashers.  
The dishwasher is not level.  
Level the dishwasher (refer to the Installation  
Manual).  
There are black or gray Aluminum utensils have rubbed against Hand wash aluminum items. Remove aluminum  
marks on the dishes  
the dishes.  
markings by using a mild abrasive cleaner.  
The interior of the tub Coffee or tea stains.  
is stained  
Use a spot cleaner to remove the stains.  
Food or beverage stain.  
Some tomato products may cause this. Running a  
rinse only cycle immediately after loading will help  
this.  
Noises  
Detergent cup opening/drain pump.  
This is normal.  
A hard object or piece of food is in the If the noise continues after the cycle is complete, call  
dishwasher during the wash cycle.  
for service.  
If the object is a piece of food that can be broken  
down by the wash cycle, the noise will stop.  
The dishwasher won’t The water valve is turned off.  
fill  
Turn on the water valve.  
The door may not be closed completely. Make sure that the door is closed and latched.  
Specifications  
Capacity  
Maximum 12 place settings  
Dimensions (WxDxH)  
Power requirements  
23 15/16 x 25 1/4 x 33 13/16 in. (60.6 x 64 x 85.8 cm)  
120V~60Hz  
Current  
8.4A  
Water pressure  
Noise (dB)  
Between 20 and 100 psi (138 and 689 kPa)  
51 dB  
18  
GeneralDetails
NameINSIGNIA NS-DWRF2SS3 Front Dishwasher
MakeInsignia
LanguageEnglish
FiletypePDF (Download)
File size0.6 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
INSIGNIA NS-DWF2SS3 Dishwasher
INSIGNIA NS-DWF2SS3 Dishwasher
INSIGNIA NS-DWH2SS8 Dishwasher
INSIGNIA NS-DWH2SS8 Dishwasher
INSIGNIA NS-DWH1SS9 Dishwasher
INSIGNIA NS-DWH1SS9 Dishwasher
INSIGNIA NS-DWR3SS1 Dishwasher
INSIGNIA NS-DWR3SS1 Dishwasher

INSIGNIA NS-DWRF2SS3 Front Dishwasher