Home > Insignia > INSIGNIA NS-DWRF2SS3 Front Dishwasher

INSIGNIA NS-DWRF2SS3 Front Dishwasher

Front Control Dishwasher  
10 - Sanitize: Use to sanitize your dishes and glassware. Maintains the water temperature at 158° F (70° C) max., and is  
available with the Normal and Heavy cycles.  
Notes:  
• Certified residential dishwashers are not intended for licensed food establishments.  
• The sanitize cycle is NSF certified.  
11 - Delay: Press repeatedly to delay the start of the selected wash cycle until the delay time indicator you want is on.  
You can select 2, 4, or 8 hours delay. After you select the delay time you want, press Start/Cancel once, the delay  
begins to count down.  
Important: If you open the door while delay is in effect, you must close the door, then press Start/Cancel to begin the cycle from that  
point, otherwise the dishwasher will stop the delay and will beep as a reminder to resume the delay. To cancel the delay and begin the  
cycle before the delay period is complete, press and hold Start/Cancel for three seconds.  
12- Start/Cancel: Press to start the dishwasher after you have selected a cycle and options (if desired). The cycle  
indicator stays on and the option indicator stays on.  
If you don’t press Start/Cancel after closing the door, the dishwasher pauses.  
Press Start/Cancel to continue with the cycle.  
To cancel a running cycle, press and hold Start/Cancel for three seconds. The dishwasher will run a one minute  
countdown and then begin draining. The dishwasher then returns to standby status.  
To load more dishes or pause the dishwasher while it’s already running, open the door. A safety mechanism stops the  
cycle. For additional information, see Adding a dish on page 10.  
CAUTION: To avoid injury, open the door slowly and carefully, and keep your face away from the dishwasher. There is a possibility of  
hot steam from inside the dishwasher.  
Note: To silence the beeping of the buttons, press the Normal and Express buttons at the same time. That will silence all of the button  
beeps except the error code warning beeps. Error code beeps will still function. To turn the button beeps back on, press the Normal  
and Express buttons at the same time again.  
Basic operation  
1
2
3
4
5
Load the dishwasher (See Preparing and loading dishes on page 7).  
Add detergent (See Filling the detergent dispenser on page 10).  
Add rinse aid, if needed (See Filling the rinse aid dispenser on page 11).  
Close the door.  
Select the cycle you want (See the Using the control panel on page 6). The indicator will flash when the selection is  
made.  
6
7
Select the options you want. The indicator will flash when the selection is made.  
To start, press Start/Cancel on the control pad.  
Preparing and loading dishes  
Preparing dishes for washing  
Scrape away large pieces of food, bones, pits, toothpicks, and similar items.The continuous filtered wash system will  
remove the remaining food particles.  
Burned-on foods should be loosened before loading.  
Empty liquids from glasses and cups.  
Foods such as mustard, mayonnaise, vinegar, lemon juice, and tomato-based products may cause discoloration of  
stainless steel and plastics if allowed to sit for a long period of time.Unless the dishwasher is to be operated at once, it  
is best to rinse off these types of foods.  
If the dishwasher drains into a garbage disposal, be sure the disposal is completely empty before starting the  
dishwasher.  
7
GeneralDetails
NameINSIGNIA NS-DWRF2SS3 Front Dishwasher
MakeInsignia
LanguageEnglish
FiletypePDF (Download)
File size0.6 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
INSIGNIA NS-DWF2SS3 Dishwasher
INSIGNIA NS-DWF2SS3 Dishwasher
INSIGNIA NS-DWH2SS8 Dishwasher
INSIGNIA NS-DWH2SS8 Dishwasher
INSIGNIA NS-DWH1SS9 Dishwasher
INSIGNIA NS-DWH1SS9 Dishwasher
INSIGNIA NS-DWR3SS1 Dishwasher
INSIGNIA NS-DWR3SS1 Dishwasher

INSIGNIA NS-DWRF2SS3 Front Dishwasher