Miele 401 U Dishwasher
en - Installation notes
Water connection
Before connecting the dishwasher or immediately following disrup-
tion in water supply the water supply pipe must be vented from air
pockets to avoid pressure surges that may destroy components in
the dishwasher.
Water supply
The quality of the incoming water must correspond to the drinking wa-
ter specification of the country in which the dishwasher is being oper-
ated.
The dishwasher must be connected to the water supply in strict ac-
cordance with current local and national water authority regulations.
The dishwasher is connected to cold or hot water supplies. If hot wa-
ter is not available, the two water inlet hoses (for cold and hot water)
must be connected to the cold water supply via a Y-piece.
The shut-off valves should remain accessible once the dishwasher
has been installed so that the water supply can be shut off whenever
the appliance is not in use.
Drainage
The dishwasher drainage hose should be connected to a separate on-
site drain for the dishwasher only. If no separate drain is available, we
recommend connecting it to a dual-chamber siphon. When using a
drain loop additional backflow prevention is not required.
If the hose is to be directly connected to the drainage outlet on site,
use the hose clip supplied with the dishwasher.
The on-site connector for the drain hose can be used for various hose
diameters. If the connector extends more than 1" (30 mm) into the
drain hose, it must be shortened. Otherwise, the drain hose can be-
come clogged.
Lay the drain hose so that it does not kink and is not being sub-
jected to pressure or tugged.
If the on-site drain connection is situated lower than the guide path
for the lower basket rollers in the open door, a siphoning effect during
a program can cause the appliance to empty itself of water.
In this case, lay the drain hose with a bend in it so that its highest
point is at least level with the guide path for the lower basket rollers.
Connecting an ex- Up to two dispensing systems for liquid cleaning agents and rinsing
ternal dispensing agents can be connected to the back of the dishwasher. Appliances
system
with integrated dispensing systems have an external connection for
rinsing agents.
4
| General | Details |
|---|---|
| Name | Miele 401 U Dishwasher |
| Make | Miele |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.71 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
Kuppersberg GSM 6074 Dishwasher
BOSCH SPV2HKX1DR Integrated Dishwasher
FISHER AND PAYKEL DD24SAX9 N Dishwasher
FISHER PAYKEL DD24SAX9 N Dishwasher
BOSCH SMH4ECX21E Dishwasher
MONOGRAM UDT165SIVII 18 Inch Dishwasher
Domain DW60ET Dishwasher
BOSCH 500 Series Dishwasher
BOSCH SMS4HCI19E Dishwasher
BOSCH SMS6EMI65Q Dishwasher