Home > Miele > Miele PFD 102 Dishwasher

Miele PFD 102 Dishwasher

Installation notes  
Water connection  
The dishwasher must only be connected to fully vented pipework.  
A brief increase in the water pressure can damage components of  
the dishwasher.  
Water inlet  
The quality of the incoming water must correspond to the drinking  
water specification of the country in which the dishwasher is being  
operated.  
The dishwasher must be connected to the water supply in strict ac-  
cordance with current local and national water authority regulations. It  
can be connected to cold or hot water supplies. Connecting the dish-  
washer to a hot water supply will reduce programme running times.  
For short programme running times, a water pressure of at least  
200 kPa is also required.  
If a stopcock is not available, only a qualified installer may connect  
the dishwasher to the drinking water supply.  
The stopcock should remain accessible once the dishwasher has  
been installed so that the water supply can be shut off whenever the  
appliance is not in use.  
Drain  
The dishwasher drain hose should be connected to a separate on-site  
drainage system for the dishwasher only. If a separate connection is  
not available, we recommend connecting the hose to a dual-chamber  
siphon.  
If the hose is to be fitted directly to the drainage system on site, use  
the hose clip supplied with the dishwasher.  
The on-site connector for the drain hose can be adapted to different  
hose diameters. If the connector extends more than 30 mm into the  
drain hose, it must be shortened. Otherwise, the drain hose can be-  
come blocked.  
Lay the drain hose so that it does not kink and is not being subjec-  
ted to pressure or tension.  
If the on-site drain connection is situated lower than the guide path  
for the lower basket rollers in the open door, a siphoning effect dur-  
ing a programme can cause the wash cabinet to empty itself of wa-  
ter.  
In this case, lay the drain hose with a bend in it so that its highest  
point is at least level with the guide path for the lower basket rollers.  
For AU, NZ the drain should be connected in accordance with AS/  
NZS 3500.2.  
External dispens- An external dispensing module for liquid cleaning agents can be con-  
ing  
nected to the back of the dishwasher.  
The dispensing module is available as an optional accessory and is  
supplied with installation instructions.  
4
 
GeneralDetails
NameMiele PFD 102 Dishwasher
MakeMiele
LanguageEnglish
FiletypePDF (Download)
File size0.29 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele 11 836 740 Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
Miele PFD 102 i Dishwasher

Miele PFD 102 Dishwasher