Miele PFD 103 SCi XXL XXL Dishwasher
Installation notes
Installation notes
For safe installation and commissioning of the dishwasher please
read the installation plan, the service documentation, the
installation sheet and the operating instructions.
This installation plan includes the dimensions of the appliance, the
technical data and the requirements to be met on site for the
installation of the dishwasher.
Installation
requirements
This dishwasher must only be installed and commissioned by the
Miele Customer Service Department, a Miele authorised dealer or a
suitably qualified specialist.
Installation should only be performed in accordance with valid
regulations, relevant standards and health and safety codes.
Environmental
requirements
Condensate can build up in the area surrounding the dishwasher. Any
furniture and fittings in the room must therefore be suitable for
purpose.
Vapour barrier film The vapour barrier film supplied protects the worktop from damage
for built-in
appliances
caused by steam when the door is opened. Attach the vapour barrier
film above the door, underneath the worktop.
Electrical
connection
All work on the electrical connection must be carried out by the Miele
Customer Service Department, an authorised Miele dealer or a
qualified electrician.
Plug connection
Hard-wired
The dishwasher should be connected to the electricity supply via a
suitably rated plug and socket.
If the dishwasher is hard-wired to the power supply, a power switch
capable of disconnecting the dishwasher at all poles must be
installed on site. This power switch must have a contact gap of at
least 3 mm. The means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules AS/NZS 3000.
The socket and the power switch must be accessible after the
appliance has been installed. An electrical safety test can then easily
be carried out, e.g., after any service or maintenance work.
The connection cable must be protected from the risk of thermal
damage.
Residual current
device (RCD)
For increased safety, it is recommended to protect the dishwasher
with a residual current device (RCD) with a trip current of 30 mA.
Equipotential
bonding
There is a screw connection point for equipotential bonding at the
back of the dishwasher.
Equipotential bonding should be carried out if possible on site.
3
| General | Details |
|---|---|
| Name | Miele PFD 103 SCi XXL XXL Dishwasher |
| Make | Miele |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.3 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
Miele PFD 104 SCVi Dishwasher
BLAUPUNKT 5VF421AU Fully Integrated Dishwasher
SIEMENS SX75EX11CE Fully Integrable Dishwasher
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
BOSCH SPS4HMW49E Dishwasher
FISHER AND PAYKEL DD60SCTX9 Tall Dishwasher
FISHER PAYKEL DD24DCHTX9 N Dishwasher
BOSCH SMS2ITI12E Dishwasher
BOSCH SHX78B75UC 24 Bar Handle Dishwasher
Fisher and Paykel DD24DT2NX9 Built-Under Dishwasher
Miele G 7191 SCVi AD 125 Dishwasher