Home > Monsher > Monsher MD 6001 Dishwasher

Monsher MD 6001 Dishwasher

68  
English  
STEP 4. Dishwasher installation steps  
Please refer to the specified installation steps in the installation  
drawings.  
1. Affix the condensation strip under the work surface of cabinet. Please ensure  
the condensation strip is flush with edge of work surface. (Step 2)  
2. Connect the inlet hose to the cold water supply.  
3. Connect the drain hose.  
4. Connect the power cord.  
5. Place the dishwasher into position. (Step 4)  
6. Level the dishwasher. The rear food can be adjusted from the front of the  
dishwasher by turning the Philips screw in the middle of the base of dishwasher use  
an Philips screw. To adjust the front feet, use a flat screw driver and turn the front  
feet until the dishwasher is level. (Step 5 to Step 6)  
7. Install the furniture door to the outer door of the dishwasher. (Step 7 to Step 10)  
8. Adjust the tension of the door springs by using an Allen key turning in a  
clockwise motion to tighten the left and right door springs. Failure to do this could  
cause damage to your dishwasher. (Step 11)  
9. The dishwasher must be secured in place. There are two ways to do this:  
A. Normal work surface: Put the installation hook into the slot of the side plane  
and secure it to the work surface with the wood screws.  
B. Marble or granite work top: Fix the side with Screw.  
A
B
GeneralDetails
NameMonsher MD 6001 Dishwasher
MakeMonsher
LanguageEnglish
FiletypePDF (Download)
File size11.18 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Monsher MD 6003 Dishwasher
Monsher MD 6003 Dishwasher
Monsher MD 4502 Dishwasher
Monsher MD 4502 Dishwasher

Monsher MD 6001 Dishwasher