Home > Monsher > Monsher MD 6001 Dishwasher

Monsher MD 6001 Dishwasher

64  
English  
CONNECTION OF DRAIN HOSES  
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or  
let it run into the sink, making sure to avoid bending or crimping it. The height  
of drain pipe must be less than 1000mm. The free end of the hose must not be  
immersed in water to avoid the back flow of it.  
Please securely fix the drain hose in either position A or position B.  
Counter  
Back of dishwasher  
A
Drain hose  
B
∅ 40 mm  
Water Inlet  
Drain Pipe  
Mains Cable  
How to drain excess water from hoses  
If the sink is 1000 higher from the floor, the excess water in hoses cannot be  
drained directly into the sink. It will be necessary to drain excess water from hoses  
into a bowl or suitable container that is held outside and lower than the sink.  
Water outlet  
Connect the water drain hose. The drain hose must be correctly fitted to avoid  
water leaks. Ensure that the water drain hose is not kinked or squashed.  
Extension hose  
If you need a drain hose extension, make sure to use a similar drain hose.  
It must be no longer than 4 meters; otherwise the cleaning effect of the  
dishwasher could be reduced.  
Syphon connection  
The waste connection must be at a height less than 100 cm (maximum) from  
the bottom of the dish. The water drain hose should be fixed.  
GeneralDetails
NameMonsher MD 6001 Dishwasher
MakeMonsher
LanguageEnglish
FiletypePDF (Download)
File size11.18 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Monsher MD 6003 Dishwasher
Monsher MD 6003 Dishwasher
Monsher MD 4502 Dishwasher
Monsher MD 4502 Dishwasher

Monsher MD 6001 Dishwasher