Home > Monsher > Monsher MD 6001 Dishwasher

Monsher MD 6001 Dishwasher

English  
63  
WATER SUPPLY AND DRAIN  
Cold water connection  
Connect the cold water supply hose to  
a threaded 3/4 (inch) connector and make  
sure that it is fastened tightly in place.  
If the water pipes are new or have not  
been used for an extended period of time, let  
the water run to make sure that the water  
is clear. This precaution is needed to avoid  
the risk of the water inlet to be blocked and  
damage the appliance.  
Ordinary supply hose  
Safety supply hose  
About the safety supply hose  
The safety supply hose consists of the double walls. The hose’s system  
guarantees its intervention by blocking the flow of water in case of the supply  
hose breaking and when the air space between the supply hose itself and the  
outer corrugated hose is full of water.  
A hose that attaches to a sink spray can burst  
if it is installed on the same water line as the  
WARNING  
dishwasher. If your sink has one, it is recom-  
mended that the hose be disconnected and the  
hole plugged.  
How to connect the safety supply hose  
1. Pull The safety supply hoses completely out from storage compartment  
located at rear of dishwasher.  
2. Tighter the screws of the safety supply hose to the faucet with thread  
3/4 inch.  
3. Turn water fully on before starting the dishwasher.  
How to disconnect the safety supply hose  
1. Turn off the water.  
2. Unscrew the safety supply hose from the faucet.  
GeneralDetails
NameMonsher MD 6001 Dishwasher
MakeMonsher
LanguageEnglish
FiletypePDF (Download)
File size11.18 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Monsher MD 6003 Dishwasher
Monsher MD 6003 Dishwasher
Monsher MD 4502 Dishwasher
Monsher MD 4502 Dishwasher

Monsher MD 6001 Dishwasher