Home > Omega > Omega ODWIF6015 Integrated Dishwasher

Omega ODWIF6015 Integrated Dishwasher

User Manual  
08  
ODWIF6015  
Installation Instructions  
Prior to Installing Appliance  
Water Supply And Drain  
WARNING: ELECTRICAL SHOCK HAZARD  
Disconnect electrical power before installing dishwasher.  
Failure to do so could result in death  
or electrical shock.  
Cold water connection  
Connect the cold water supply hose to a threaded 3/4 inch  
connector and make sure that it is fastened tightly in place.  
If the water pipes are new or have not been used for an  
extended period of time, let the water run to make sure that  
the water is clear. This precaution is needed to avoid the risk  
of the water inlet to be blocked and damage the appliance.  
IMPORTANT: The installation of the pipes and electrical  
equipments should be done by professionals.  
Regular Supply Hose  
Safety Supply Hose  
Power Connection  
WARNING: FOR YOUR PERSONAL SAFETY  
Do not use an extension cord or an adapter plug  
with this appliance.  
Safety Supply Hose  
The safety supply hose consists of double walls. The hose's  
system guarantees its intervention by blocking the flow  
of water in case of the supply hose breaking and when  
the air space between the supply hose itself and the outer  
corrugated hose is full of water.  
Do not, under any circumstances, cut or remove  
the earthing connection from the power cord.  
Electrical requirements  
WARNING:  
A hose that attaches to a sink spray can burst if it is installed  
on the same water line as the dishwasher. If your sink has  
one, it is recommended that the hose be disconnected and  
the hole plugged.  
Please look at the rating label to know the rating voltage and  
connect the dishwasher to the appropriate power supply.  
Use the required fuse 10A/13A/16A, time delay fuse or circuit  
breaker recommended and provide separate circuit serving  
only this appliance.  
Connecting the Safety Supply Hose  
1. Pull the safety supply hose completely out from storage  
compartment located at rear of dishwasher.  
Electrical connection  
2. Tighter the screws of the safety supply hose to the faucet  
with thread 3/4 inch.  
Ensure the voltage and frequency of the power being  
corresponds to those on the rating plate. Only insert the  
plug into an electrical socket which is earthed properly.  
If the electrical socket to which the appliance must be  
connected is not appropriate for the plug, replace the socket,  
rather than using a adapters or the like as they could cause  
overheating and burns.  
3. Turn water fully on before starting the dishwasher.  
Disconnecting the Safety Supply Hose  
1. Turn off the water.  
2. Unscrew the safety supply hose from the faucet.  
WARNING: Ensure that proper earthing exists before use.  
GeneralDetails
NameOmega ODWIF6015 Integrated Dishwasher
MakeOmega
LanguageEnglish
FiletypePDF (Download)
File size5.59 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
omega ODWIS6015X Dishwasher
omega ODWIS6015X Dishwasher
Omega ODW300XN Slimline Dishwasher
Omega ODW300XN Slimline Dishwasher
Omega ODWIF6015 Dishwasher
Omega ODWIF6015 Dishwasher
omega ODWF6015BXCOM Dishwasher
omega ODWF6015BXCOM Dishwasher
Omega ODWF6014BX Dishwasher
Omega ODWF6014BX Dishwasher
omega OFI101X Dishwasher
omega OFI101X Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
Omega ODW702X DishWasher
Omega ODW702X DishWasher
Omega ODWF6015X Dishwasher
Omega ODWF6015X Dishwasher
omega ODD614X Drawer Dishwasher
omega ODD614X Drawer Dishwasher

Omega ODWIF6015 Integrated Dishwasher