Home > Omega > Omega ODWIF6015 Integrated Dishwasher

Omega ODWIF6015 Integrated Dishwasher

User Manual  
10  
ODWIF6015  
Installation Instructions (Continued)  
Positioning the Appliance  
Built-in Installation Steps  
When positioning the appliance in your desired location,  
the back should rest against the wall behind it, and the  
sides should be along the adjacent cabinets or walls.  
The dishwasher is equipped with water supply and drain  
hoses that can be positioned either to the right or the left  
sides to facilitate proper installation.  
1. Begin by affixing the condensation strip under the work  
surface of the cabinet, ensuring it is flush with the edge of  
the work surface (refer to Positioning the Appliance).  
2. Connect the inlet hose to the cold water supply.  
3. Connect the drain hose.  
4. Connect the power cord.  
The installation position of dishwasher should be near the  
existing inlet and drain hoses and power cord.  
5. Position the dishwasher in the designated location  
(refer to Figure 3).  
6. Level the dishwasher by adjusting the rear feet using a  
Philips screw at the base's center, accessible from the  
front. For the front feet adjustment, use a flat screwdriver  
and turn until the dishwasher is level (refer to Figure 1).  
90°  
90°  
Electrical, drain  
and water supply  
line entrances  
7. Install the Aesthetic Door Panel onto the outer door of the  
dishwasher (refer to Aesthetic Door Panel Installation on  
page 12).  
820mm  
80mm  
8. Adjust the tension of the door springs using an Allen key,  
turning it clockwise to tighten both left and right door  
springs. Neglecting this step may result in damage to the  
dishwasher (refer to Figure 2).  
580mm  
100mm  
Space between cabinet  
bottom and floor  
9. Secure the dishwasher in place by following one of the two  
methods (refer to Figure 3):  
A. For a wood work surface: Insert the installation hook  
into the slot of the side plane and secure it to the work  
surface using wood screws.  
600mm  
IMPORTANT:  
B. For a marble or granite worktop: Fix the side with  
screws.  
Less than 5 mm between the top of dishwasher and  
cabinet and the outer door aligned to cabinet.  
If dishwasher is in stalled at the corner of the cabinet,  
there should be some space when the door is opened.  
Depending on where your electrical outlet is, you may need  
to cut a hole in the opposite cabinet side.  
Dishwasher Cabinetry  
Dishwasher  
Door  
Minimum Space  
of 50mm  
GeneralDetails
NameOmega ODWIF6015 Integrated Dishwasher
MakeOmega
LanguageEnglish
FiletypePDF (Download)
File size5.59 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
omega ODWIS6015X Dishwasher
omega ODWIS6015X Dishwasher
Omega ODW300XN Slimline Dishwasher
Omega ODW300XN Slimline Dishwasher
Omega ODWIF6015 Dishwasher
Omega ODWIF6015 Dishwasher
omega ODWF6015BXCOM Dishwasher
omega ODWF6015BXCOM Dishwasher
Omega ODWF6014BX Dishwasher
Omega ODWF6014BX Dishwasher
omega OFI101X Dishwasher
omega OFI101X Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
Omega ODW702X DishWasher
Omega ODW702X DishWasher
Omega ODWF6015X Dishwasher
Omega ODWF6015X Dishwasher
omega ODD614X Drawer Dishwasher
omega ODD614X Drawer Dishwasher

Omega ODWIF6015 Integrated Dishwasher