Home > Omega > omega OFI101X Dishwasher

omega OFI101X Dishwasher

The dishes were not  
loaded correctly.  
See notes in " Loading the Dishwasher Baskets ".  
The program was  
not powerful enough.  
Select a more intensive programme.  
See" Wash Cycle Table ".  
Not enough detergent  
was dispensed.  
Use more detergent, or change your detergent.  
Items are blocking  
Rearrange the items so that the sprayer can rotate freely.  
the path of spray arms.  
The filter combination  
is not clean or  
is not correctly fitted.  
This may cause  
the spray arm jets  
get blocked.  
Clean and/or fit the filter combination correctly.  
Clean the spray arm jets. See "Cleaning the Spray  
Arms".  
Unsatis  
-factory  
washing  
result  
Combination of soft  
water and too much  
detergent.  
Use less detergent if you have soft water and select  
a shortest cycle to wash the glassware and to get  
them clean.  
Aluminum utensils  
have rubbed against  
dishes.  
Use a mild abrasive cleaner to eliminate those marks.  
Dishes block  
Re-loading the dishes properly.  
detergent cups opens.  
Improper loading  
Load the dishwasher as suggested in the directions.  
Too little rinse-aid  
Increase the amount of rinse-aid/Refill the rinse-aid  
dispenser.  
Dishes are removed  
too soon.  
Do not empty your dishwasher immediately after  
washing. Open the door slightly so that the steam can  
escape. Begin unloading the dishwasher only once the  
dishes are barely warm by touching.  
Unsatis  
-factory  
drying  
result  
Wrong program  
selection  
In short program the rinse temperature is lower.  
Choose a program with a high rinse temperature.  
Water drainage is more difficult with these items.  
Cutlery or dishes of this type are not suitable for  
washing in the dishwasher.  
Using cutlery with  
a low-quality coating  
When some malfunctions come on, the appliance will display error codes to warn you:  
Faucets is not opened, or water intake is  
restricted,or water pressure is too low.  
Longer inlet time.  
Malfunction of heating element .  
Not reaching required temperature.  
Overflow.  
Some element of dishwasher leaks .  
If overflow occurs, turn off the main water supply before calling a service.  
If there is water in the base pan because of an overfill or small leak,  
the water should be removed before restarting the dishwasher.  
24  
GeneralDetails
Nameomega OFI101X Dishwasher
MakeOmega
LanguageEnglish
FiletypePDF (Download)
File size4.86 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
omega ODWIS6015X Dishwasher
omega ODWIS6015X Dishwasher
Omega ODW300XN Slimline Dishwasher
Omega ODW300XN Slimline Dishwasher
Omega ODWIF6015 Dishwasher
Omega ODWIF6015 Dishwasher
omega ODWF6015BXCOM Dishwasher
omega ODWF6015BXCOM Dishwasher
Omega ODWF6014BX Dishwasher
Omega ODWF6014BX Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
Omega ODWF4510X 45cm Compact Dishwasher
Omega ODW702X DishWasher
Omega ODW702X DishWasher
Omega ODWF6015X Dishwasher
Omega ODWF6015X Dishwasher
omega ODD614X Drawer Dishwasher
omega ODD614X Drawer Dishwasher
Omega ODWF6014X Dishwasher
Omega ODWF6014X Dishwasher

omega OFI101X Dishwasher