smeg DI262D Dishwasher
Problem and alarm code
Possible cause and solution
You cannot activate the appli‐
ance.
•
•
Make sure that the mains plug is connected to the mains socket.
Make sure that there is no damaged fuse in the fuse box.
The programme does not start.
•
•
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the end of the
countdown.
•
The appliance recharges the resin inside the water softener. The du‐
ration of the procedure is approximately 5 minutes.
The appliance does not fill with
water.
The display shows i10 or i11.
•
•
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low. For
this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
•
•
•
The appliance does not drain the
water.
The display shows i20.
•
•
•
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows i30.
•
•
•
Close the water tap.
Make sure that the appliance is correctly installed.
Make sure the baskets are loaded as instructed in the user manual.
Malfunction of the water level de‐
tection sensor.
•
•
Make sure that the filters are clean.
Switch the appliance off and on.
The display shows i41 - i44.
Malfunction of the wash pump or
the drain pump.
•
Switch the appliance off and on.
The display shows i51 - i59 or
i5A - i5F.
The temperature of the water in‐
side the appliance is too high or
malfunction of the temperature
sensor occurred.
•
•
Make sure that the temperature of the inlet water does not exceed
60°C.
Switch the appliance off and on.
The display shows i61 or i69.
Technical malfunction of the ap‐
pliance.
•
Switch the appliance off and on.
The display shows iC0 or iC3.
The level of water inside the ap‐
pliance is too high.
The display shows iF1.
•
•
•
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right height above
the floor. Refer to the installation instructions.
The appliance stops and starts
more times during operation.
•
It is normal. It provides optimal cleaning results and energy savings.
22 ENGLISH
| General | Details |
|---|---|
| Name | smeg DI262D Dishwasher |
| Make | Smeg |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.95 MB |
(1 votes, average: 5.00 out of 5)
Loading...
smeg DWAU6224N4 Matte Black Underbench Dishwasher
smeg DWA6224X4 Dishwasher
smeg DWAFI6224-4 Dishwasher
smeg STU8633 Dishwasher
smeg DWAFI6214 Dishwasher
smeg LVS344PM 60 cm Free Standing Dishwasher
smeg LSPU8653X 24″ Fingerprint Resistant Dishwasher
Smeg DI362DQ Dishwasher
smeg DI323BL Dishwasher
smeg DWA6315X1 Dishwasher
beko BDFN15430G Electrical Household Dishwasher
BOSH SX73HX42VE Dishwasher
Whirlpool 400011659130 Dishwasher
beko DUT25401WHW Front Pocket Handle Dishwasher
FISHER PAYKEL DW24UT2I2 Built Under Dishwasher
ELVITA CDM6605X Dishwasher
AEG FSE84727P Dishwasher
NEFF GV 640Voll-I Dishwasher
UGP-24CR Classic Retro By Unique Dishwasher
Hotpoint A1385707 Dishwasher