TOMADO TDW5501W Tabletop Dishwasher
USING THE APPLIANCE FOR THE FIRST TIME
Before using the appliance for the first ꢀme, you should proceed as follows: carefully unpack the appliance and remove all
packaging material, also from the inside, and any promoꢀonal sꢀckers.
Keep the packaging (plasꢀc bags, polystyrene and cardboard) out of the reach of children.
Aſter unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface. Prior to using the machine for the first ꢀme please check whether the electricity
and supply water specificaꢀons match the values indicated by the installaꢀon instrucꢀons for the appliance.
Remove all packaging materials inside the machine.
Fill the salt reservoir and fill up with water unꢀl it almost overflows. Set the water hardness seꢄng.
Fill the rinse aid reservoir.
FILLING THE SALT RESERVOIR
For a good washing result, the dishwasher needs soſt, i.e. less calcareous water. Otherwise, white lime residues will remain
on the dishes and the interior of the dishwasher. This has a negaꢀve effect on your applinace’s washing, drying and shining
performance. For this purpose, dishwasher salt is used.
•
•
•
Remove the basket and unscrew the cap of the
salt reservoir (1).
Fill with salt ꢀll the overflow level, about 1.0 kg
(2).
Fill the reservoir before first use with water. It
is normal for a liꢁle water to flow out of the
opening when doing this.
1
2
Open
•
Screw the cap back on firmly.
ATTENTION!
•
•
Remove any spilled salt and run a full program to prevent corrosion to the boꢁom.
Refill the salt reservoir when the indicator light of the salt reservoir lights up.
SETTING THE SALT CONSUMPTION
To find out the water hardness level in your area, contact your local wny. Adjust the salt consumpꢀon according to
the table on the next page.
Note! Hardness level is adjusted to level 4 as a factory seꢄng.
•
•
Close the door and switch on the machine.
Press and hold the Program button P for 5 seconds to enter the mode for setting the salt consumption. This must be set
within 60 seconds after turning the machine on.
•
•
Set the level by pressing Program button P repeatedly. Use the table of water hardness level settings.
After adjusting the level of water hardness, press the On/Off button to confirm and store the setting. If the setting is not
confirmed, it is stored automatically after 5 seconds.
Table of water hardness level seꢃngs
Water hardnesss German hardness Internaꢀonal indicaꢀon Program indicator
°dH 1)
Regeneraꢀon occurs every X
program cycles 3)
level
hardness mmol/l 2)
hardness level
H1
0-5
0-0.9
● indicator light RAPID30 on
● indicator light DELICATE on
none
H2
6-11
1.0-2.0
10
● indicator light DELICATE on
● indicator light RAPID30 on
H3
H4 *
H5
12-17
18-22
23-34
2.1-3.0
3.1-4.0
4.1-6.1
5
3
2
● indicator light ECO on
● indicator light ECO on
● indicator light FAST30 on
● indicator light ECO on
● indicator light DELICATE on
H6
35-45
6.2-8.0
1
EN - 30
| General | Details |
|---|---|
| Name | TOMADO TDW5501W Tabletop Dishwasher |
| Make | TOMADO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.09 MB |
(1 votes, average: 5.00 out of 5)
Loading...
TOMADO TDW6001W Dishwasher
TOMADO TDW6001B Dishwasher
BOSCH SMU2ITS01A Series 2 Built Under Dishwasher
BOSCH SBH4HVX00G Dishwasher
SIEMENS SN73HX10VG Fully Integrated Dishwasher
BOSCH SBV4HAX20N Dishwasher
rhima RU-40 Underbench Dishwasher
FISHER PAYKEL DD24SCTW9 N Dishwasher
BOSCH SMP6ZCW80S Dishwasher
KINGFISHER KF1000DW Deluxe Passthrough Dishwasher
BOSCH SMS2HAW12Y Dishwasher
Miele PFD 101 Free Standing Dishwasher