Whirlpool W10903644A Dishwasher
Filtration System
Your dishwasher has latest technology in dishwasher filtration. This filtration system minimizes sound and optimizes water and energy
conservation while providing superior cleaning.
The filter system consists of 2 parts an upper filter assembly and a lower filter.
IMPORTANT: To avoid damage to dishwasher, do not operate your dishwasher
without filters properly installed. Be sure lower filter is securely in place and upper
Upper filter
assembly
filter assembly is locked into place. If upper assembly turns freely, it is not locked
into place.
The filters may need to be cleaned when:
■
Visible objects or soils are on the upper filter assembly.
Dishes feel gritty to the touch.
■
Lower filter
It is very easy to remove and maintain the filters. The chart below shows the recommended cleaning frequency.
RECOMMENDED TIME INTERVAL TO CLEAN YOUR FILTER
Number of Loads Per Week
If you only scrape
before loading*
If you scrape and rinse
before loading
If you wash before loading
8–12
4–7
Every 2 months
Every 4 months
Twice per year
Every 4 months
Once per year
Once per year
Once per year
Once per year
Once per year
1–3
*We recommend this practice because it will conserve the water and energy that you would have used to prepare your dishes. This will
also save you time and effort.
Filter Reinstallation Instructions
Very Hard Water
1. Noting the previous illustrations, place the lower filter under
the locating tabs in the bottom of the dishwasher, so the
round opening for the upper filter assembly lines up with
the round opening in the bottom of the tub.
If you have hard water (above 15 grains), clean your filter at least
once per month. Buildup of white residue on your dishwasher
indicates hard water. For tips on removing spots and stains, see
the “Troubleshooting” section.
2. Insert the upper filter assembly into the circular opening
Filter Removal Instructions
in the lower filter.
1. Turn the upper filter assembly ¼ turn counterclockwise
and lift out.
Locating tab
Locating tab
To replace upper filter assembly
To remove upper filter assembly
3. Slowly rotate the filter clockwise until it drops into place.
Continue to rotate until the filter is locked into place. If the
filter is not fully seated (still turns freely), continue to turn the
filter clockwise until it drops and locks into place.
NOTE: The upper filter assembly arrow does not have to align
with the arrow in the lower filter as long as the filter is locked.
IMPORTANT: To avoid damage to dishwasher, do not operate
your dishwasher without the filters properly installed. Be sure the
lower filter is securely in place and the upper filter assembly is
locked into place. If the upper filter assembly turns freely, it is not
locked into place.
2. Separate the upper filter assembly by gently pulling apart.
3. Clean the filters as shown.
Cleaning Instructions
IMPORTANT: Do not use wire brush, scouring pad, etc., as they
may damage the filters.
Rinse filter under running water until most soils are removed.
If you have hard-to-remove soils or calcium deposits from hard
water, a soft brush may be required.
12
| General | Details |
|---|---|
| Name | Whirlpool W10903644A Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.47 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
FRIGIDAIRE GDSH4715AF Dishwasher
Maidaid Halcyon AMH80 Amika Pass Through Gravity Drain Dishwasher
FISHER PAYKEL DW60FC1X1 Dishwasher
BOSCH SPS2IKW01G Dishwasher
FISHER AND PAYKEL DD24SDFTX9 N Dish Drawer Dishwasher
Midea MDC17P0ABB Dishwasher
Danby DDW621WDB Dishwasher
BOSCH SMS4HMI06E Dishwasher
NEFF S355HCX27G Dishwasher
BOSCH SMU2HVW20S Dishwasher