Whirlpool W10903644A Dishwasher
OPTION SELECTIONS
OPTIONS
CAN BE
SELECTED
WITH
WHAT IT DOES ADDED
ADDED
TIME TO WATER
CYCLE
NA
GALLONS
(LITERS)
Runs dishwasher at a later time. Select a wash cycle
and options. Each time you press the Delay keypad, it
will display the next available delay time. Press DELAY.
Press the START/RESUME keypad. Close door firmly.
Available with Delays start of
any cycle
NA
a cycle up to
24 hours.
NOTES:
■
The dishwasher remembers the last Delay you
selected. To reset the delay time to something
other than what is displayed, continue to press
the Delay keypad until the desired delay time
is reached.
(varies by
model)
■
Anytime the door is opened (such as, to add a
dish), Start/Resume must be pressed again to
resume delay countdown.
Raises main wash temperature to improve cleaning
for loads containing tough, baked-on food.
Sensor
Heavy
Raises the
0:05 to
0:13
0 to 3.86
(0 to 14.6)
main wash
Normal
temperature to
Soak & Clean 135°F (57°C).
Dries dishes with heat. This option, with the use of
rinse aid, will provide better drying performance. Plastic
items are less likely to deform when loaded in the top
rack. Use Heat Dry for optimum dry performance. Turn
the Heat Dry option off for air dry.
Extended Dry lengthens the time that Heat Dry is active.
This option with the use of rinse aid will provide better
drying performance.
Sensor
Heavy
Uses heating
element to speed
drying times.
0:08 to
0:46
0
Normal
Soak & Clean Heat Dry option
defaults to On
when any cycle is
selected, except
for 1-Hour Wash.
Sanitizes dishes and glassware in accordance with NSF
International NSF/ANSI Standard 184 for Residential
Dishwashers. Certified residential dishwashers are
not intended for licensed food establishments. Only
sanitizing cycles have been designed to meet the
requirements of the NSF/ANSI 184 performance
standard for soil removal and for sanitization efficacy.
There is no intention, either directly or indirectly, that
all cycles on a NSF/ANSI 184 certified dishwasher
meet the NSF/ANSI 184 performance standard for soil
removal and for sanitization efficacy.
Sensor
Heavy
Normal
Raises the
0:05 to
1:06
0 to 3.86
(0 to 14.6)
main wash
temperature to
135°F (57°C) and
the final rinse
temperature to
156°F (69°C).
(location of
“Sanitized”
indicator
varies by
model)
At end of the cycle, the “Sanitized” indicator will glow.
If your load did not properly sanitize, the indicator will
flash at the end of the cycle. This can happen if the
cycle is interrupted or if the water does not reach the
required temperature. The light goes off when you open
and close the door or press CANCEL.
Avoids unintended use of dishwasher between cycles or cycle and option changes during a cycle.
To turn on Control Lock, press and hold CONTROL LOCK for 3 seconds. Control Lock light will stay on for a short time,
indicating that it is activated and all keypads are disabled. If you press any keypad while your dishwasher is locked,
the light flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked.
To turn off Control Lock, press and hold CONTROL LOCK for 3 seconds. The light turns off.
9
| General | Details |
|---|---|
| Name | Whirlpool W10903644A Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.47 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
BERTAZZONI DW18S2IXV 18 Inch Dishwasher
FISHER PAYKEL DD60SCHTX9 Dishwasher
BOSCH SMS6HMW01R Dishwasher
CMA DISHMACHINES CMA-180 VL Ventless Upright Dishwasher
PHILCO PD 1045 EA Dishwasher
Electrolux A26298401 24 Dishwasher
AEG FSK53617Z Dishwasher
Hotpoint HD8I Integrated Dishwasher
BOSCH SMV4EVX14E Fully Dishwasher
BOSCH SMV25BX01R Dishwasher