Whirlpool W10903644A Dishwasher
Fold-Down Tines
Removable Top Rack
The removable top rack allows you to wash larger items such
as pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack
from dishwasher.
The row of tines on the left-hand
and right-hand sides of the upper,
or in the back of the lower rack,
can be adjusted to make room for
a variety of dishes.
To remove the rack:
To adjust the fold-down tines:
1. To gain access to the track stops, pull the upper rack forward
1. Grasp the tip of the tine that
about halfway out of the tub.
is in the tine holder.
2. Press on the edge of the ridged area on the track stop while
tipping the track stop toward the center of the dishwasher.
This action releases a small retaining tab that locks the track
stop to the track (see Track stop - left).
2. Gently push the tine out of
the holder.
3. Lay the tines down, toward
the center of the rack.
NOTE: It is helpful to use 2 hands. Take special note of the
orientation of the track stops.
EZ-2-Lift™ Top Rack Adjuster
You can raise or lower the top rack to fit tall items in either the top
or bottom rack. Adjusters are located on each side of the top rack.
To raise the rack:
Press both rack adjuster
thumb levers and lift the rack
until it is in the up position
and level.
Track stop - left
To lower the rack:
Press both rack adjuster
thumb levers and slide the
rack to its down position
and level.
3. With the retaining tab released, pull the track stop straight
toward the opposite track to remove it.
4. After removing both track stops, gently pull the top rack out
NOTE: The top rack must be level.
of the tracks by rolling it toward you.
5. Replace the track stops by coming up from under the track
and slipping the lower tab of the track stop into the lower slot
of the track (see Track stop - right) and rotate the track stop
into place. Then press on the edge of the ridged area while
pushing the track stop straight toward the track. This action
locks the retaining tab back into place.
Easy-to-Remove Third Level Rack (on some models)
If additional space is
needed in the upper
rack, the third level
rack can easily be
removed.
To remove, fully
extend rack until it
stops. Then, open the
track stops on each
A. Track stop
B. Track
side and slide the rack
out to remove.
Low profile items such
as serving utensils
and silverware, may
be loaded on the third
level rack.
Track stop - right
6. Test the track stop by pulling it toward the opposite track to
ensure that it is locked in place.
To replace the rack:
1. Gently pull the tracks forward in dishwasher until they stop.
Remove track stops. See steps 1 though 3 above.
2. Place the back wheels on each side of the rack into the track
and roll the rack into the tracks, but do not push the rack all
the way into the tub.
3. Insert front rack wheels on each side of the rack into the track.
4. Slide the rack into the dishwasher.
5. Replace the track stops. See steps 5 and 6 above.
IMPORTANT: Be sure that the track stops are locked in
place and cannot be easily removed. They keep the rack
from coming out of the track.
11
| General | Details |
|---|---|
| Name | Whirlpool W10903644A Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.47 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
FRIGIDAIRE A23549801 Dishwasher
omega ODWF6015BXCOM Dishwasher
BOSCH SMS4IKI51Q Free Standing Dishwasher
FISHER PAYKEL DD60DDFHB9 Double Dishwasher
SIEMENS SN93HX60CG Dishwasher
FISHER PAYKEL DD24DTX6HI1 Sanitize Dishwasher
BOSCH SMS8YCI01E Dishwasher
FISHER and PAYKEL DD60SCHX9 Dishwasher
SIEMENS SE23HI60CE Dishwasher
Whirlpool WDT740SALB Dishwasher