Whirlpool W11602471 Dishwasher
Daily Reference Guide
EN
PROGRAMS TABLE
Duration
of wash
Water
Energy
Available
options *)
Programs description
consumption consumption
program
(litres/cycle) (kWh/cycle)
(h: min)**)
Eco 50°- Program is suitable to clean normally soiled table-
ware, that for this use, it is the most efficient program in terms
of its combined energy and water consumption, and that it is
used to assess compliance with the EU Ecodesign legislation.
4:00
9.5
0.65
Rapid 45° - Program is recommended for limited amount
of lightly-soiled dishes with no dried food residues. Does not
include the drying phase.
0:30 - 0:40
10.0 - 12.0
0.55 - 0.65
-
Crystals 45° - Program for delicate items, which are more
1:40 - 1:50
2:25 - 3:10
12.5 - 16.5
15.5 - 24.5
0.95 - 1.20
1.30 - 1.70
sensitive to high temperatures, for example, glasses and cups.
Auto Intensive 65° - Automatic pro-
Senses the level of
soiling on the dishes
and adjusts the
gram for heavily soiled dishes and pans.
Auto Mixed 55° - Automatic program
for normally soiled dishes with dried
food residues.
program accor-
1:20 - 3:00
1:00 - 1:50
7.5 - 19.5
7.5 - 15.5
0.75 - 1.20
0.70 - 1.10
dingly. When the
sensor is detecting
the soil level an
animation appears
in the display and
the cycle duration is
updated.
Auto Fast 50° - Automatic program
for normally and lightly soiled dishes.
The everyday cycle that ensure optimal
cleaning and drying performance in
shorter time.
Prewash - Use to refresh crockery planned to be washed
0:12
1:15
4.5
0.10
1.10
-
-
later. No detergent is to be used with this program.
Self-Clean 65° - Program to be used to perform mainte-
nance of the dishwasher, to be carried out only when the
dishwasher is EMPTY using specific detergents designed for
dishwasher maintenance.
11.0
-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration by up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up)
(see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and
beeps will sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
HALF LOAD - If there are not many dishes to be washed, HALF LOAD
is used to save water, electricity or time, depending on the selected program.
Remember to reduce the amount of detergent.
TIME ON THE FLOOR - A LED light projected on the floor indicates the
time left to the end of the cycle. The light goes off every time the door
is opened. The light goes off at the end of a cycle.This feature is active
by default, but it is possible to deactivate it in the “SETTINGS MENU”.
SILENT - Suitable for night-time operation of the appliance. This option
can be used to limit noise emissions during wash phases. It will increase
cycle time depending on base cycle selection.
DESCALE - Alarm - Limescale accumulation was detected on internal
components of the appliance. Check if the Water Hardness Setting is
at the correct value and salt is present in the salt container (see FIRST TIME
USE), then use a descaling product (WPro brand is recommended) with
Self-Clean program. After a successful descaling, the icon will stop being
displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display)
and then will be BLOCKED to prevent component damage, with only
the Self-Clean program available. Performing a full descaling will unblock
the product. In the case of extremely high amounts of limescale, descaling
may have to be performed twice to be efficient.
SANI RINSE - This option can be used to sanitize washed dishes. It will
increase the final rinse temperature and add an antibacterial wash to
the selected program. Ideal to clean crockery and feeding bottles. The
dishwasher door must be kept shut for the entire duration of the program
in order to guarantee a reduction of germs.
WARNING: the crockery and plates could be extremely hot at the end
of the cycle.
POWERCLEAN PRO - Thanks to the additional power jets this option
provides a more intensive and powerful wash in the lower rack, in the
specific area. This option is recommended for washing pots and casseroles
(please refer to the PowerClean Pro in loading section).
NaturalDry - It is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying
performance every day. The door opens at a temperature that is safe to
your kitchen furniture, thus door will not be opened when the option of
SANI RINSE is on.
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase allows for improved drying. The EXTRA DRY
option results in the lengthening of the wash cycle.
DELAY - The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
As additional steam protection, specially designed protection foil is added
together with the dishwasher.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
To see how to mount protection foil please refer to the INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in
the “SETTINGS MENU”.
2. Press the START/Pause button and close the door within 4 sec. The timer
will begin counting down.
SENSING - When the sensor is detecting the soil level an
animation appears in the display (around 20 min.) and the cycle
duration is updated. SENSING is for the level of soiling on the dishes and is
present for all cycles (excepting Eco) adjusting the program accordingly.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
WATER TAP CLOSED - Alarm - Flashes, when there is no inlet water or
water tap is closed.
3
| General | Details |
|---|---|
| Name | Whirlpool W11602471 Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 23.08 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
BOSCH SBI4ECS21E Dishwasher
FISHER PAYKEL DD60DCX9 Double Dishwasher
AEG FSE83847P Fully Integrated Dishwasher
Bosch 041203 Active Water Dishwasher
BOSCH SBH8TB800E/41 Dishwasher
Midea WQP4-2605 Tabletop Dishwasher
BOSCH SMS2ITI41G Dishwasher
Whirlpool W11323304G Dishwasher
FISHER PAYKEL DD60STI9 Dishwasher
Fisher and Paykel DW60FC6X1 Dishwasher