Home > WISBERG > WISBERG WBDW40CW Dishwasher

WISBERG WBDW40CW Dishwasher

3.5.3. ADD THE DISHWASHER SALT  
1NOTICE!  
RISK OF DAMAGE TO THE DEVICE.  
Always clean the stainless steel parts immediately with a soft cloth after topping up the dishwasher salt. Dishwasher salt can  
damage the stainless steel parts.  
Do not use dishwasher salt if the appliance is set to water softener level H1.  
Due to the hardness of the rinsing water, lime may remain in the appliance after some time. Lime can leave a white mark on your  
crockery or cutlery. The dishwasher salt removes the lime from the rinsing water.  
The dishwasher salt LED lights up when the dishwasher salt needs to be  
refilled.  
1. Remove any dishes from the baskets.  
2. Remove the salt reservoir cap.  
3. Place the funnel in the salt reservoir.  
4. Fill the salt reservoir with 1 litre of water. The salt reservoir only  
needs to be filled with water for the first use after installation. After  
that, you only need to top up the salt reservoir with dishwasher  
salt.  
5. Fill the salt reservoir to the rim with dishwasher salt.  
6. Shake the funnel to allow the last grains of dishwasher salt to drop  
into the salt reservoir.  
7. Remove the funnel from the salt reservoir.  
8. Screw the cap back on the salt reservoir. The dishwasher salt LED  
goes out.  
9. Remove the remaining dishwasher salt around the salt reservoir  
with a soft, dry cloth.  
10. Start a short programme to remove the last remnants of  
dishwasher salt.  
41  
GeneralDetails
NameWISBERG WBDW40CW Dishwasher
MakeWISBERG
LanguageEnglish
FiletypePDF (Download)
File size14.72 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
WISBERG WBDW44DB Dishwasher
WISBERG WBDW44DB Dishwasher

WISBERG WBDW40CW Dishwasher