WISBERG WBDW40CW Dishwasher
PROBLEM
POSSIBLE CAUSE
POTENTIAL SOLUTION
The water is not
pumped out.
The discharge hose is twisted or clamped.
Check whether the discharge hose is blocked.
Check whether the water drainage is blocked.
Remove the blockage from the filter system.
The filter system is clogged.
A lot of foam is
created during a
wash.
The wrong dishwasher detergent has been
used.
Only use dishwasher detergent suitable for
dishwashers.
Rinse aid has been spilled.
Remove the residual rinse aid around the rinse
aid reservoir with a soft, dry cloth.
There is a deposit
on the inside of the
appliance.
The hardness of the water can cause limescale Clean the inside of the appliance with a
build-up.
special dishwasher cleaner. Follow the
cleaning product instructions.
The dishwasher detergent gives off colour.
The cutlery is not corrosion-resistant.
Use dishwasher detergent without dyes.
There are rust marks
on the cutlery.
Only place corrosion-resistant cutlery in the
appliance.
No short programme has been started after the Remove the remaining dishwasher salt around
dishwasher salt was topped up.
the salt reservoir with a soft, dry cloth.
Start a short programme to remove the last
remnants of dishwasher salt.
The salt reservoir cap is not properly closed.
The spray arm is blocked by tableware.
Tableware is loose in the appliance.
Screw the cap securely onto the salt reservoir.
The appliance makes
an exceptional
amount of noise.
Open the door.
Move the tableware which causes the
problem.
Close the door.
The appliance is not level.
Level the appliance. Follow the instructions in
chapter 3.4.4.Level the appliance.
The dishes are not
clean.
The dishes are not placed properly or are
placed too close together in the racks.
Follow the instructions in chapter 4.1.Putting the
dishes in the dishwasher.
The selected programme is not powerful
enough.
Select a more powerful programme.
Too little dishwasher detergent has been used.
Follow the dishwasher detergent instructions
for the correct amount of dishwasher detergent
per wash.
The spray arm is blocked by tableware.
Open the door.
Move the tableware which causes the
problem.
Close the door.
The filter system is dirty.
Clean the filter system. Follow the instructions in
chapter 5.2.Cleaning the filters.
The water softening level is incorrectly set.
Set the water softening level to the water
hardness in your region. Follow the instructions
in chapter 3.5.1.Setting the water hardness.
52
| General | Details |
|---|---|
| Name | WISBERG WBDW40CW Dishwasher |
| Make | WISBERG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 14.72 MB |

WISBERG WBDW44DB Dishwasher








































