WISBERG WBDW40CW Dishwasher
ERROR MESSAGES ON THE
DISPLAY
POSSIBLE CAUSE
POTENTIAL SOLUTION
E1
The water pressure is low.
Check that the supply hose is connected
correctly. Fully open the stop cock.
E3
The heating element is defective.
There is a leak somewhere.
An authorised service technician is needed to
solve the problem. Please contact customer
service.
E4
1. Unplug the power cable from the
earthed socket.
2. Check that the supply hose is connected
correctly. Fully open the stop cock.
Close the door properly.
1. Unplug the power cable from the
earthed socket.
2. Check whether the discharge hose is
blocked.
1. Unplug the power cable from the
earthed socket.
2. Check whether the water drainage is
blocked.
3. Remove excess water from the bottom
of the appliance before switching it on
again.
E8
EC
Ed
There is a fault in the discharge pump.
Press the on-/off switch again to compeletely
switch off the device.
Press the on/off button to turn on the
appliance.
An authorised service technician is needed to
solve the problem. Please contact customer
service.
There is a fault in the circuit board or
motor.
Press the on-/off switch again to compeletely
switch off the device.
Press the on/off button to turn on the
appliance.
An authorised service technician is needed to
solve the problem. Please contact customer
service.
No contact can be made between the
circuit board and the display.
An authorised service technician is needed to
solve the problem. Please contact customer
service.
54
| General | Details |
|---|---|
| Name | WISBERG WBDW40CW Dishwasher |
| Make | WISBERG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 14.72 MB |

WISBERG WBDW44DB Dishwasher








































