AEG FFB75707PM Dishwasher
German de‐
grees (°dH)
French de‐
grees (°fH)
mmol/l
mg/l (ppm)
Clarke de‐ Water softener
grees
level
<4
<7
<0.7
<70
< 5
2)
1
1)
2)
Factory setting.
Do not use salt at this level.
Regardless of the type of detergent used,
set the proper water hardness level to
keep the salt refill indicator active.
such cases, the regeneration prolongs the
total duration of a programme by additional 5
minutes.
Subsequently, the rinsing of the water
softener that lasts 5 minutes may begin in the
same cycle or at the beginning of the next
programme. This activity increases the total
water consumption of a programme by
additional 4 litres and the total energy
consumption of a programme by additional 2
Wh. The rinsing of the softener ends with a
complete drain.
Multi-tabs containing salt are not effective
enough to soften hard water.
Regeneration process
For the correct water softener operation, the
resin of the softener device needs to be
regenerated regularly. This process is
automatic and is the part of the normal
dishwasher operation.
Each performed softener rinse (possible more
than one in the same cycle) may prolong the
programme duration by another 5 minutes
when it occurs at any point at the beginning
or in the middle of a programme.
When the prescribed quantity of water (see
values in the table) has been used since the
previous regeneration process, a new
regeneration process will be initiated between
the final rinse and the programme end.
All the consumption values mentioned in
this section are determined in line with
the currently applicable standard in
laboratory conditions with water hardness
2.5mmol/L (water softener: level 3)
according to the regulation: 2019/2022 .
The pressure and the temperature of
water as well as the variations of the
mains supply can change the values.
Water softener level Amount of water (l)
1
2
250
100
62
47
25
17
10
5
3
4
5
6
How to set the water softener level
Make sure the appliance is in user mode.
1. Press Program.
7
8
9
3
•
•
•
The indicator
still flashes.
10
3
The remaining indicators are off.
The display shows the current setting:
In case of the high water softener setting, it
may occur also in the middle of the
programme, before the rinse (twice during a
programme). Regeneration initiation has no
impact on the cycle duration, unless it occurs
in the middle of a programme or at the end of
a programme with a short drying phase. In
e.g.
= level 5.
2. Press Program repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
12 ENGLISH
| General | Details |
|---|---|
| Name | AEG FFB75707PM Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.78 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
Wexiodisk WD-ACS 47D Cutlery Dishwasher
BOSCH SPI4HMS49E Semi Integrated Dishwasher
INVENTUM VVW4530AW Dishwasher
GE EDW4000 Triton XL Dishwasher
Electrolux KEQC7210L Air Dry Dishwasher
FISHER PAYKEL DD24DCTX9 N Tall Dishwasher
FISHER PAYKEL DW60U2I1 Integrated Dishwasher
FISHER PAYKEL DD24DI9N Sanitize Dishwasher
Hotpoint 869991662940 Dishwasher
BOSCH 9001164801 Dishwasher