AEG FSB73427Z Dishwasher
3. Wash the spray arm under running water.
Use a thin pointed tool, e.g. a toothpick,
to remove particles of soil from the holes.
Run water through the holes to wash soil
particles away from the inside.
A
B
4. To install the spray arm back, insert the
mounting element in the spray arm and
fix it in the duct by turning it
C
counterclockwise. Make sure that the
mounting element locks into place.
1. Pull out the upper basket.
2. To detach the spray arm, turn the
mounting element clockwise.
11. TROUBLESHOOTING
Refer to the below table for information on
possible problems.
WARNING!
Improper repair of the appliance may
pose a danger to the safety of the user.
Any repairs must be performed by
qualified personnel.
With some problems, the display shows an
alarm code.
The majority of problems that may occur can
be solved without the need to contact an
Authorised Service Centre.
Problem and alarm code
Possible cause and solution
You cannot activate the appliance.
•
•
Make sure that the mains plug is connected to the mains socket.
Make sure that there is no damaged fuse in the fuse box.
The programme does not start.
•
•
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the end of the
countdown.
•
The appliance recharges the resin inside the water softener. The dura‐
tion of the procedure is approximately 5 minutes.
20 ENGLISH
| General | Details |
|---|---|
| Name | AEG FSB73427Z Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.72 MB |

AEG FSK76748P Dishwasher

AEG FSK53617Za Dishwasher

AEG FSK74747P Dishwasher

AEG GS60AIM Dishwasher

AEG FSE73507P Dishwasher

AEG FSE74737P Quickselect Dishwasher

AEG FFB73727PM Dishwasher

AEG F8642FI Tall Tub Dishwasher

AEG FFE83800PM Dishwasher

AEG FFE73600PM Built Under Dishwasher









































