AEG FSB73427Z Dishwasher
Problem and alarm code
Possible cause and solution
The appliance does not fill with wa‐
ter.
The display shows i10 or i11.
•
•
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low. For this
information, contact your local water authority.
•
•
•
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not drain the
water.
The display shows i20.
•
•
•
Make sure that the sink spigot is not clogged.
Make sure that the interior filter system is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on.
The display shows i30.
•
•
•
Close the water tap.
Make sure that the appliance is correctly installed.
Make sure the baskets are loaded as instructed in the user manual.
Malfunction of the water level detec‐
tion sensor.
The display shows i41 - i44.
•
•
Make sure that the filters are clean.
Switch the appliance off and on.
Malfunction of the wash pump or the
•
Switch the appliance off and on.
drain pump.
The display shows i51 - i59 or i5A -
i5F.
The temperature of the water inside
the appliance is too high or malfunc‐
tion of the temperature sensor oc‐
curred.
•
•
Make sure that the temperature of the inlet water does not exceed
60°C.
Switch the appliance off and on.
The display shows i61 or i69.
Technical malfunction of the appli‐
ance.
The display shows iC0 or iC3.
•
Switch the appliance off and on.
The level of water inside the appli‐
ance is too high.
The display shows iF1.
•
•
•
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right height above the
floor. Refer to the installation instruction.
The appliance stops and starts
more times during operation.
•
•
It is normal. It provides optimal cleaning results and energy savings.
The programme lasts too long.
If the delay start option is set, cancel the delay setting or wait for the
end of the countdown.
•
•
Activating options increases the programme duration.
The displayed programme duration
is different than the duration in the
consumption values table.
The pressure and the temperature of the water, the variations of the
mains supply, the options, the quantity of dishes and the degree of soil
can change the programme duration.
The remaining time in the display in‐
creases and skips nearly to the end
of the programme duration.
•
This is not a defect. The appliance is working correctly.
ENGLISH 21
| General | Details |
|---|---|
| Name | AEG FSB73427Z Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.72 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AEG FFE73600PM Built Under Dishwasher
Whirlpool WDFS3L5PBSSG 15 Place Setting Free Standing Dishwasher
IKEA ÖSTVEDA Integrated Dishwasher
BOSCH SHV53CM3N 300 Series Full Dishwasher
AEG FFB64607ZM 6000 SatelliteClean Dishwasher
AEG FSB53927Z Integrated Dishwasher
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
Westinghouse WSF6608XB Dishwasher
INVENTUM IVW6015A Dishwasher
FISHER PAYKEL DD60STX6HI1 FP BI Integrated Single DishDrawer Dishwasher
BOSCH 041203 Dishwasher