Home > AEG > AEG FSE73800RO Dishwasher

AEG FSE73800RO Dishwasher

ENGLISH  
25  
13.2 Adjusting the level of the  
appliance  
Correct levelling of the appliance allows  
the door to close and seal properly.  
If the door does not close correctly, raise  
or lower the adjustable feet to level the  
appliance.  
13.3 Water inlet hose  
Connect the inlet hose to a water tap  
with an external BSP thread spout of  
3/4''.  
For best washing performance, it is  
recommended to connect the appliance  
to a cold water supply.  
13.4 Water drain hose  
The highest point of the drain hose must  
be no more than 600 mm from the floor  
and must have a continuous fall to the  
plumbing connection.  
Energy savings can be made by  
connecting the appliance to a Solar  
water system and using economy  
options, however the water temperature  
must not exceed 60° C.  
The drain hose can be lengthened using  
additional lengths and connectors. These  
must be purchased from Electrolux  
Spare Parts. The extension length must  
not exceed 2 metres.  
Inlet water supply  
Water pressure: 1000 kPa max - 50  
kPa min.  
Water flow rate 10 L / minute min.  
If water pressure is in excess of 1000  
kPa, a pressure reducing valve should  
be used. Check for leaks.  
The drain hose must be free of  
obstructions.  
Remove the sink plug when the  
appliance drains the water to prevent  
that the water goes back into the  
appliance.  
If water temperature is in excess of  
60° C, a tempering valve should be  
used. Check for leaks.  
CAUTION!  
The appliance has a security feature to  
prevent dirty water going back into the  
appliance. If the spigot of the sink has a  
non-return valve, this valve can cause  
the appliance to drain incorrectly. remove  
the non-return valve.  
Always use new hoses when  
you connect the appliance to  
the water mains. Old hoses  
must not be used. The water  
inlet hose must be examined  
at an interval of twelve  
If you connect the water drain hose to a  
trap spigot under the sink, remove the  
plastic membrane. If you do not remove  
the membrane, remaining food can  
cause a blockage in the drain hose  
spigot.  
months for deterioration and  
replaced if necessary.  
The water pressure must be in the limits  
indicated in the chapter ''TECHNICAL  
INFORMATION''. Make sure that the  
local water authority gives you the  
average mains pressure in your area.  
In order to pass the safety valve through  
the kitchen cabinets, an opening of at  
least 45 mm x 90 mm is needed.  
GeneralDetails
NameAEG FSE73800RO Dishwasher
MakeAEG
LanguageEnglish
FiletypePDF (Download)
File size0.9 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSK74747P Dishwasher
AEG GS60AIM Dishwasher
AEG GS60AIM Dishwasher
AEG FSE73507P Dishwasher
AEG FSE73507P Dishwasher
AEG FSB73427Z Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AEG FFE83800PM Dishwasher

AEG FSE73800RO Dishwasher