Home > AEG > AEG FSE73800RO Dishwasher

AEG FSE73800RO Dishwasher

ENGLISH  
21  
Problem and alarm code  
Possible cause and solution  
The anti-flood device is on.  
The display shows i30.  
Close the water tap and contact an Authorised Service  
Centre.  
The appliance stops and  
starts more times during op‐  
eration.  
It is normal. It provides optimal cleaning results and en‐  
ergy savings.  
The programme lasts too  
long.  
If the delay start option is set, cancel the delay setting or  
wait for the end of the countdown.  
Activating options can increase the programme duration.  
The displayed programme  
duration is different than the  
duration in the consumption  
values table.  
The pressure and the temperature of the water, the var‐  
iations of the mains supply, the options, the quantity of  
dishes and the degree of soil can change the pro‐  
gramme duration.  
The remaining time in the  
display increases and skips  
nearly to the end of the pro‐  
gramme duration.  
This is not a defect. The appliance is working correctly.  
Small leak from the appli‐  
ance door.  
The appliance is not levelled. Loosen or tighten the ad‐  
justable feet (if applicable).  
The appliance door is not centred on the tub. Adjust the  
rear foot (if applicable).  
The appliance door is diffi‐  
cult to close.  
The appliance is not levelled. Loosen or tighten the ad‐  
justable feet (if applicable).  
Parts of the tableware are protruding from the baskets.  
The appliance door opens  
during the wash cycle.  
The AirDry function is activated. You can deactivate the  
function. Refer to "Basic settings".  
Rattling or knocking sounds  
from the inside of the appli‐  
ance.  
The tableware is not properly arranged in the baskets.  
Refer to basket loading leaflet.  
Make sure that the spray arms can rotate freely.  
The appliance trips the cir‐  
cuit-beaker.  
The amperage is insufficient to supply simultaneously all  
the appliances in use. Check the socket amperage and  
the capacity of the meter or turn off one of the applian‐  
ces in use.  
Internal electrical fault of the appliance. Contact an Au‐  
thorised Service Centre.  
Once you have checked the appliance,  
deactivate and activate the appliance. If  
the problem occurs again, contact an  
Authorised Service Centre.  
WARNING!  
We do not recommend using  
the appliance until the  
problem has been  
For alarm codes not described in the  
table, contact an Authorised Service  
Centre.  
completely fixed. Unplug the  
appliance and do not plug it  
in again until you are certain  
that it operates correctly.  
GeneralDetails
NameAEG FSE73800RO Dishwasher
MakeAEG
LanguageEnglish
FiletypePDF (Download)
File size0.9 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AEG FFE83800PM Dishwasher

AEG FSE73800RO Dishwasher