AEG FSE73800RO Dishwasher
24
Water supply pressure
bar (minimum and maximum)
kPa (minimum and maximum)
0.5 - 10
50 - 1000
min 5 °C
Water supply
Capacity
2)
Cold water
Place settings
15
1)
Refer to the rating plate for other values.
2)
Cold water connection is recommended for best washing performance.
13. INSTALLATION
Removeentireplastic
membranefrom sink trap
spigot & fit drain hose to spigot
with clamp
Thereshould be a minimum
2mm gap between the top of
the dishwasher and
The hose should not be
extended by more than
2 metres or water pump-
undersideof bench top
out
problems may occur
SINK
Secure dishwasher with
brackets or screws provided
600mm max
300mm min
400mm
min
DISHWASHER
Gap on both sides should be
equal, & no greater than
5 mm per side.
POWER OUTLET
If floor is not level, adjust
levelling legs to suit
Min. 400 mm straight
section
Install the appliance under a kitchen
counter.
Put the appliance adjacent to a water tap
and a water drain.
For the venting of the appliance only
water hoses and mains cable openings
are necessary.
13.1 Adjusting the height of
the appliance
1. To adjust the front height, turn the 2
front feet counterclockwise to raise
the appliance.
2. To adjust the rear height, turn the
middle screw counterclockwise to
raise the appliance.
| General | Details |
|---|---|
| Name | AEG FSE73800RO Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.9 MB |

AEG FSK76748P Dishwasher

AEG FSK53617Za Dishwasher

AEG FSK74747P Dishwasher

AEG FSE73507P Dishwasher

AEG GS60AIM Dishwasher

AEG FSB73427Z Dishwasher

AEG FSE74737P Quickselect Dishwasher

AEG FFB73727PM Dishwasher

AEG F8642FI Tall Tub Dishwasher

AEG FFE83800PM Dishwasher













































