AEG FSK52617Z Dishwasher
ENGLISH
25
The PNC can be found on the rating
plate on the appliance door. You can
WARNING!
We do not recommend using
the appliance until the
problem has been
also check the PNC on the control panel.
Before checking the PNC, make sure the
appliance is in the programme selection.
completely fixed. Unplug the
appliance and do not plug it
in again until you are certain
that it operates correctly.
1. Press and hold simultaneously
and
for about 3 seconds.
The display shows the PNC of your
appliance.
12.1 The product number
code (PNC)
If you contact an Authorised Service
Centre, you need to provide the product
number code of your appliance.
2. To exit the PNC presentation, press
and hold simultaneously
for about 3 seconds.
and
The appliance returns to the programme
selection.
12.2 The dishwashing and drying results are not satisfactory
Problem
Possible cause and solution
Poor washing results.
•
Refer to "Daily use", "Hints and tips" and the basket
loading leaflet.
•
•
Use more intensive washing programme.
Activate the ExtraPower option to improve the washing
results of a selected programme.
•
•
Clean spray arm jets and filter. Refer to "Care and
Cleaning".
Poor drying results.
Tableware was left for too long inside the closed appli‐
ance. Activate the function AirDry to set the automatic
opening of the door and to improve the drying perform‐
ance.
There is no rinse aid or the dosage of rinse aid is not
sufficient. Fill the rinse aid dispenser or set the dosage
of rinse aid to a higher level.
•
•
•
•
•
The quality of the rinse aid can be the cause.
Always use rinse aid, even with multi-tablets.
Plastic items may need to be towel dried.
The programme does not have the drying phase. Re‐
fer to "Programmes overview".
There are whitish streaks or
bluish layers on glasses and
dishes.
•
The released quantity of rinse aid is too high. Adjust
the rinse aid dosage to a lower level.
•
•
The quantity of detergent is too high.
There are stains and dry water
drops on glasses and dishes.
The released quantity of rinse aid is not sufficient. Ad‐
just the rinse aid dosage to a higher level.
The quality of the rinse aid can be the cause.
•
•
The interior of the appliance is
wet.
This is not a defect of the appliance. Humidity conden‐
sates on the appliance walls.
| General | Details |
|---|---|
| Name | AEG FSK52617Z Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.84 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
Whirlpool W11389327B Portable Dishwasher
VALBERG VAL12C47SSC Dishwasher
SIEMENS SN45ZS55CS Dishwasher
BOSCH SN23HI65MM Dishwasher
FISHER PAYKEL DD60DI9 DishDrawer Dishwasher
baridi DH224 Mini Tabletop Dishwasher
SHARP QW-NA24S42DI-EE Dishwasher
BOSCH SPS2IKW04G Slimline Dishwasher
Electrolux KESC7320L Dishwasher
FISHER PAYKEL DOOR DD60ST Door Panel Tall Dishwasher