Home > ARTUSI > ARTUSI ADW5008X Dishwasher

ARTUSI ADW5008X Dishwasher

2.6 Fitting The Machine Undercounter  
If you wish to fit your machine  
undercounter, there must be sufficient  
space to do so and the wiring-plumbing  
must be suitable to do so (1). If the space  
under the countertop is suitable for fitting  
your machine, remove the worktop as  
shown in the illustration (2).  
WARNING: The countertop, which  
the machine will be placed under, must be  
stable in order to prevent imbalance.  
H1: min A  
H2: min B1  
H3: min B2  
The top panel of the dishwasher must  
be removed to fit the machine under the  
countertop.  
To remove the top panel, remove the  
screws that hold it on, located at the rear  
of the machine. Then, push the panel 1 cm  
from the front towards the rear and lift it.  
Adjust the machine feet according to the  
slope of the floor (3).  
A
B
60 cm  
All  
B1  
B2  
Products  
Fit your machine by pushing it under the  
counter taking care not to crush or bend the  
hoses (4).  
Product’s Height  
(±2 mm)  
820 mm  
830 mm  
835 mm  
WARNING: After removing the top  
panel of your dishwasher, the machine  
should be placed in a space of the  
A: If there is no felt on the top of the  
product; you should take into account this  
product’s height.  
dimensions shown in the figure below.  
B1: If there is felt on the top of the product  
with 2nd basket; you should take into  
account this product’s height.  
B2: If there is felt on the top of the product  
with 3rd basket; you should take into  
account this product’s height.  
EN - 11  
GeneralDetails
NameARTUSI ADW5008X Dishwasher
MakeARTUSI
LanguageEnglish
FiletypePDF (Download)
File size2.07 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
ARTUSI ADW4001X Dishwasher
ARTUSI ADW4001X Dishwasher
ARTUSI ADWFI700 Dishwasher
ARTUSI ADWFI700 Dishwasher
ARTUSI ADW5001X Dishwasher
ARTUSI ADW5001X Dishwasher

ARTUSI ADW5008X Dishwasher