BOMANN GSP 7418 Household Dishwasher
leakage of the inner hose. Switching off the water
supply leads over an electronic contact.
If necessary, you can order an inlet hose safety sys-
tem from your dealer or in our online accessories
reference number found under “Technical data”.
Connecting the water inlet hose
(cold water connection)
1
Water inlet
2
Drain pipe
3
Mains cable
NOTE:
• Connect the drain hose to a drainpipe (B) with a
minimum diameter of 40 mm; alternatively, the
hose can be attached to a sink or directly to the
drain (A).
The water pressure must be between 0.04-1.0 MPa.
For higher water pressure: connect pressure reduc-
ing valve upstream.
Inlet hose safety
Normal inlet hose
system
• In any case, make sure that the drain hose is not
bent or squeezed.
• The drain hose may be installed up to a maximum
height of 1000 mm above the rinsing floor.
• Fasten the hose securely to prevent it from
changing its position and thus leaking water.
• Connect the water inlet hose to a water thread
with ¾“. Tighten the hose in the direction of the
screw thread; make sure it is firmly seated.
• Connect the other end of the inlet hose to the inlet
valve on the rear of the appliance; also ensure
that it is firmly seated.
Electrical connection
WARNING:
• The installation to the mains supply must conform
to the local standards and regulations.
• Improper connection may cause to an electric
shock!
Connecting the water drain hose
NOTE:
• Do not use multiple sockets or extension cords.
• It is not allowed to modify the plug provided with
the appliance! If the plug does not fit properly to
the outlet, let install a proper outlet by an author-
ized specialist.
The water drain hose is approx. 1.5 m long and can
be extended to max. 4 m with a suitable hose and
connector.
CAUTION:
To prevent dirty water from flowing back, the free end
of the hose must not be below the water level of the
drain.
• The accessibility of the power plug must always
be ensured to disconnect the appliance from the
power supply in case of an emergency.
• Make sure that the voltage supply matches the
specifications on the rating label (door frame) be-
fore connecting.
• Connect the mains cable to a properly installed
and earthed wall outlet.
29
| General | Details |
|---|---|
| Name | BOMANN GSP 7418 Household Dishwasher |
| Make | BOMANN |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.81 MB |

BOMANN GSPE 7420 VI Household Dishwasher

BOMANN GSP 7417 Household Dishwasher

BOMANN GSP 7409 Household Dishwasher

























































