Home > BOMANN > BOMANN GSP 7418 Household Dishwasher

BOMANN GSP 7418 Household Dishwasher

Water hardness  
°dH  
Regeneration occurs every  
X program sequence1)  
Setting  
Salt consumption / cycle  
Mmol/l  
0 – 0.94  
1.0 – 2.0  
2.1 – 3.0  
3.1 – 4.0  
4.1 – 6.0  
6.1 – 9.8  
0 – 5  
H1  
no regeneration  
0 g  
9 g  
6 – 11  
H2  
10  
5
12 – 17  
18 – 22  
23 – 34  
35 – 55  
H3 (factory setting)  
12 g  
20 g  
30 g  
60 g  
H4  
H5  
H6  
3
2
1
°dH: German degree of hardness  
1) Every cycle with a regeneration operation consumes additional 2.0 liters of water, the energy consumption  
increases by 0.02 kWh and the program extends by 4 minutes.  
To open the dispenser, screw the lid counter-  
B. Fill the rinse aid dispenser  
clockwise to the open position and remove the lid.  
Function of rinse aid  
Add the rinse aid into the dispenser, being careful  
The rinse aid is automatically added during the final  
not to overfill. The dispenser contains approx.  
rinse, ensuring thorough rinsing and a spot and  
110 ml.  
streak free drying.  
Before closing the appliance door, put on the lid in  
the open position back and turn it clockwise to the  
closed position.  
When to refill the rinse aid dispenser  
If the warning LED does not  
light up, you can estimate the  
amount of remaining rinse aid  
to the optical level indicator  
(D) next to the dispenser.  
NOTE:  
Remove spilled rinse aid with an absorbent cloth to  
avoid excessive foaming during the next rinse.  
Adjusting the rinse aid dosage  
When the rinse aid dispenser is full, the indicator is  
completely dark. If the rinse aid diminishes, the size  
of the black dot changes as shown below. To avoid  
spotting, the rinse aid level must not drop below ¼.  
When forming spots and the dishes dries poorly,  
increase the added amount of rinse aid. You can set  
the amount of addition between level 1 (min.) and  
level 6 (max.).  
full  
¾ full  
½ full  
¼ full  
empty  
Take off the lid of the rinse aid dis-  
penser and adjust the dial to the de-  
sired level. The factory setting is “4”.  
Fill in the rinse aid  
NOTE:  
Increase the dosage if there are drops of water or  
lime spots on the dishes after rinsing. Reduce the  
dosage if there are sticky whitish stains on dishes or  
a bluish film on glassware or knife blades.  
31  
GeneralDetails
NameBOMANN GSP 7418 Household Dishwasher
MakeBOMANN
LanguageEnglish
FiletypePDF (Download)
File size0.81 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BOMANN GSPE 7420 VI Household Dishwasher
BOMANN GSPE 7420 VI Household Dishwasher
BOMANN GSP 7417 Household Dishwasher
BOMANN GSP 7417 Household Dishwasher
BOMANN GSP 7409 Household Dishwasher
BOMANN GSP 7409 Household Dishwasher

BOMANN GSP 7418 Household Dishwasher