BOMANN GSP 7418 Household Dishwasher
Removing the appliance cover
Installation
The appliance cover can be removed and thus re-
ducing the unit height to 81.5 cm; to place the dish-
washer under a suitable kitchen worktop.
WARNING:
The appliance must not be connected to the mains
during installing. Otherwise, there is danger to life or
electric shock hazard!
a) Loosen the screws on the unit
back and remove the cover.
b) After removing the cover, re-
tighten the screws.
CAUTION:
• For proper operation, the appliance must be con-
nected professionally. The data of inlet and outlet
as well as the electrical connection values must
meet the required criteria.
Adjusting the feet
• It is recommended that the installation, water
connection and electrical connection, be carried
out by a specialist.
Check with a spirit level whether
the appliance is leveled horizon-
tally. If the unit is not in balance,
the feet must be adjusted.
Installation location
• The site should be located near the water inlet
and outlet, as well as near a properly grounded
power socket.
Water connection
CAUTION:
• Installation to the water supply must be carried
out in accordance with local laws and regulations.
• The appliance is not suitable for hot water supply.
• Use the new hose set supplied to connect the
appliance to the water supply. Do not reuse old or
used connection sets.
• Place the appliance so that all controls are easily
to reach, and the appliance door can open without
being impeded.
• Take care of a solid and horizontal position of the
appliance. If the appliance is not horizontally lev-
eled, adjust the feet accordingly (see “Adjusting
the feet”).
• If the water supply is new or has not been used
for a long time, make sure that the water is clear
and free of impurities before connecting it to the
water supply.
• Power cord and water hoses may not kinked or
squashed.
• Avoid the installation:
-
-
near heaters, next to a stove, direct sunlight or
any other heat sources;
NOTE, the connection to the water mains may only
be made in accordance with DIN EN 1717 of the
drinking water ordinance. A suitable safety device
against drinking water contamination through back-
flow must be installed.
at locations with high humidity (e.g. outdoors),
as metal parts would be susceptible to corro-
sion under such circumstances;
-
-
in rooms where the temperature could drop
below freezing. Do not expose the appliance
any weather.
Notes on inlet hose safety system
(delivery scope depending on model)
The safety system consists of a double-walled inlet
hose. It guarantees to cut off the water supply when
near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.).
28
| General | Details |
|---|---|
| Name | BOMANN GSP 7418 Household Dishwasher |
| Make | BOMANN |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.81 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOMANN GSPE 7420 VI Household Dishwasher
BOMANN GSP 7417 Household Dishwasher
BOMANN GSP 7409 Household Dishwasher
Whirlpool DU850SWP Dishwasher
maxima 09240000 Dishwasher
CAFE CDD220P2WS1 Energy Star Smart Drawer Dishwasher
BOSCH SMS4HKI07E Dishwasher
BOSCH SPV4HMX55Q Dishwasher
FISHER and PAYKEL DW24UT2I2 Sanitize Integrated Dishwasher
FRIGIDAIRE FDHP4336AS 24 Tall Tub Dishwasher
BOSCH SMV2ITX09E Dishwasher
FISHER AND PAYKEL DD24STX6I1 Drawer Dishwasher
FISHER AND PAYKEL DD24DTI9 N Dishwasher