BOMANN GSPE 7420 VI Household Dishwasher
• Adjust the front feet (b) with a wrench until the
dishwasher is level.
Notes on inlet hose safety system
(delivery scope depending on model)
Fixing the dishwasher
The safety system consists of a double-walled inlet
hose. It guarantees to cut off the water supply when
leakage of the inner hose. Switching off the water
supply leads over an electronic contact.
Fix the appliance with the enclosed screws in the
holes provided. Caution, improper installation can
cause the appliance to tip over!
If necessary, you can order an inlet hose safety sys-
tem from your dealer or in our online accessories
reference number found under “Technical data”.
Connecting the water inlet hose
(cold water connection)
A If the worktop is made of wood, fasten the appli-
ance to the worktop.
NOTE:
The water pressure must be between 0.04-1.0 MPa.
For higher water pressure: connect pressure reduc-
ing valve upstream.
B If the worktop is made of marble or granite, fasten
the appliance to the side with the cabinet unit.
Put on the screw cover caps.
Inlet hose safety
Normal inlet hose
system
Water connection
CAUTION:
• Installation to the water supply must be carried
out in accordance with local laws and regulations.
• The appliance is not suitable for hot water supply.
• Use the new hose set supplied to connect the
appliance to the water supply. Do not reuse old or
used connection sets.
• Connect the water inlet hose to a water thread
with ¾“. Tighten the hose in the direction of the
screw thread; make sure it is firmly seated.
• Connect the other end of the inlet hose to the inlet
valve on the rear of the appliance; also ensure
that it is firmly seated.
• If the water supply is new or has not been used
for a long time, make sure that the water is clear
and free of impurities before connecting it to the
water supply.
Connecting the water drain hose
NOTE:
NOTE, the connection to the water mains may only
be made in accordance with DIN EN 1717 of the
drinking water ordinance. A suitable safety device
against drinking water contamination through back-
flow must be installed.
The water drain hose is approx. 1.5 m long and can
be extended to max. 4 m with a suitable hose and
connector.
CAUTION:
To prevent dirty water from flowing back, the free end
of the hose must not be below the water level of the
drain.
32
| General | Details |
|---|---|
| Name | BOMANN GSPE 7420 VI Household Dishwasher |
| Make | BOMANN |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.77 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOMANN GSP 7418 Household Dishwasher
BOMANN GSP 7417 Household Dishwasher
BOMANN GSP 7409 Household Dishwasher
Home and Marker TURBOWASH Angoily Dishwasher
BLAUPUNKT 5VF421AU Dishwasher
FISHER AND PAYKEL DW24U6I1 Integrated Dishwasher
TESLA WDI461M Dishwasher
IKEA 004.756.25 DISKAD Integrated Dishwasher
JENNAIR W11745540A Dishwasher
INSIGNIA NS-DWRF2SS3 Front Dishwasher
INVENTUM VVW6030AS dishwasher
BOSCH SMV25AX06E Dishwasher
BOSCH SMS4EKI02E-30 Dishwasher