Home > BOMANN > BOMANN GSPE 7420 VI Household Dishwasher

BOMANN GSPE 7420 VI Household Dishwasher

Adjusting the salt consumption  
The salt consumption can be adjusted according to  
your water hardness and thus be regulated optimally.  
Remove the lower basket and unscrew the lid of  
the salt container.  
Switch the appliance on.  
Within 60 seconds after switching on the appli-  
ance, keep pressing the program selection button  
for more than 5 seconds to enter the water hard-  
ness setting mode.  
Add about 1.5 kg of salt by using the supplied  
funnel tube.  
Full fill the salt container with water (just before  
the first use).  
The water hardness can be selected by repeated-  
ly pressing the program selection button:  
↪H3→H4→H5→H6→H1→H2↩; the display shows  
the setting (see table below).  
Screw the lid firmly on again after filling the con-  
tainer.  
Depending on salt resolution, the warning LED  
usually disappears immediately after filling.  
The setting is saved automatically after a few  
seconds; alternatively, you can end the setup by  
pressing the power button.  
Water hardness  
Setting  
Regeneration occurs every  
Salt consumption / cycle  
X program sequence1)  
°dH  
Mmol/l  
0 – 0.94  
1.0 – 2.0  
2.1 – 3.0  
3.1 – 4.0  
4.1 – 6.0  
6.1 – 9.8  
0 – 5  
H1  
no regeneration  
0 g  
9 g  
6 – 11  
12 – 17  
18 – 22  
23 – 34  
35 – 55  
H2  
10  
5
H3 (factory setting)  
12 g  
20 g  
30 g  
60 g  
H4  
H5  
H6  
3
2
1
°dH: German degree of hardness  
1) Every cycle with a regeneration operation consumes additional 2.0 liters of water, the energy consumption  
increases by 0.02 kWh and the program extends by 4 minutes.  
When to refill the rinse aid dispenser  
B. Fill the rinse aid dispenser  
If the warning LED does not  
Function of rinse aid  
light up, you can estimate the  
The rinse aid is automatically added during the final  
amount of remaining rinse aid  
rinse, ensuring thorough rinsing and a spot and  
to the optical level indicator  
streak free drying.  
(D) next to the dispenser.  
When the rinse aid dispenser is full, the indicator is  
completely dark. If the rinse aid diminishes, the size  
of the black dot changes as shown below. To avoid  
spotting, the rinse aid level must not drop below ¼.  
34  
GeneralDetails
NameBOMANN GSPE 7420 VI Household Dishwasher
MakeBOMANN
LanguageEnglish
FiletypePDF (Download)
File size1.77 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
BOMANN GSP 7418 Household Dishwasher
BOMANN GSP 7418 Household Dishwasher
BOMANN GSP 7417 Household Dishwasher
BOMANN GSP 7417 Household Dishwasher
BOMANN GSP 7409 Household Dishwasher
BOMANN GSP 7409 Household Dishwasher

BOMANN GSPE 7420 VI Household Dishwasher