CHAMPION 2000 Series Door type Dishwasher
Installation
Electrical Connections
3-Phase to 1-Phase Conversion
SINGLE PHASE
POWER CONNECTION
208-240V/60/1
A standard 3-phase operation dishwasher can be converted for
1-phase operation with the installation of a jumper wire on the main
terminal and rewiring of the wash tank and booster tank heaters.
A jumper wire, jumper bars and a new data plate are stowed
on top of the wash tank heater junction box.
LINE IN
To convert the dishwasher from 3-phase to 1-phase operation:
L1
L2
GRD
Install Main Terminal Block Jumper Wire
1. Disconnect all power to the machine.
2. Remove the top-mounted control cabinet cover and locate the
main terminal block located in the left-rear corner of the cabinet.
3. Connect the jumper wire (shipped inside the control cabinet)
between L2 and L3 on the output side of the main terminal block.
L1
L2
L3
4. Connect the 1-phase incoming power supply to L1 and L2 on the
input side of the main terminal block.
JUMPER
Connect the jumper wire between L2 and L3
on the output side of the main terminal block
Rewire Wash Tank Heater Element for 1PH
1. Remove the lower front panel.
L1
33
2. Remove the wash tank heater junction box cover.
L1
33
L2
34
3. Remove the paper insulator and jumper bars from the heater
terminals.
L3
35
3PH
4. Additional short jumper bars are stowed with the new data plate.
5. Reposition the jumper bars for 1PH as shown below.
L2
34
1PH
L3
35
6. Connect the #33 wire to one element terminal as shown.
7. Connect the #34 and #35 wires to the other terminals as shown.
8. Reinstall the paper insulator and the junction box cover.
1PH
L3
38
3PH
Rewire Booster Heater Element for 1PH
1. Remove the booster heater element cover.
2. Remove the paper insulator and jumper bars from the heater
terminals.
36
L1
37
L2
3. Install the jumper bars for 1PH as shown below.
36
L1
38
L3
4. Additional short jumper bars are stowed with the new data plate.
5. Connect the #36 wire to one element terminal as shown.
6. Connect the #37 and #38 wires to the other terminals as shown.
7. Reinstall the paper insulator and the booster heater element cover.
37
L2
NOTE: The additional jumper bars needed
for 1PH operation are stowed with the new
data plate on top of the wash tank heater
junction box.
ATTENTION:
Affix the new data plate on top of the existing machine data plate to complete the conversion.
5
| General | Details |
|---|---|
| Name | CHAMPION 2000 Series Door type Dishwasher |
| Make | Champion |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.84 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux EIDW6105GS Dishwasher
BOSCH SHX78CM2N 24 Dishwasher
GERMAN POOL 450 Series Dishwasher
FISHER AND PAYKEL DD24SA9 Dishwasher
Maidaid Halcyon AMH80 Amika Pass Through Gravity Drain Dishwasher
FISHER PAYKEL baseDD24SHTI9 N Dishwasher
FISHER PAYKEL DD24STX6PX1 Sanitize DishDrawer Dishwasher
SIEMENS SR65YX11ME Fully Dishwasher
FISHER AND PAYKEL DD24ST4NX9 Single DishDrawer Dishwasher
BOSCH SMS26DW00T Dishwasher