CHAMPION 2000 Series Door type Dishwasher
Operation
Normal Operation Mode
In-cycle
Light
Pressure
Gauge
Final Rinse
Temperature
Gauge
Power
Switch
Wash
Temperature
Gauge
Door Safety
Switch
Follow the instructions below to operate the dishwasher in a Normal Wash Mode. A Rinse Sentry feature
holds the dishwasher in a wash mode if the booster heater temperature is below 180ºF/82ºC.
1. Turn the main power on at the main circuit breaker.
2. Make sure the spray arms and the scrap screens are in place.
3. Turn the water supply on.
4. Close the dishwasher front door.
5. Push the dishwasher Power Switch to the ON position. The power switch will illuminate and the
machine will fill with water.
6. Check the pressure gauge as the machine fills and make sure the incoming water pressure is between
20-25 psi.
7. Wait up to 10-minutes for the WASH temperature gauge to indicate a minimum of 150ºF/66ºC.
8. Load soiled wares into the dish rack. Place plates, glasses, cups and bowls in a peg rack.
Place utensils in a single layer in a flat-bottom rack. Place pots and pans in a flat-bottom rack.
Do not overload the dish racks.
9. Slide 1 dish rack into the wash compartment making sure that wares do not interfere with the
rotating spray arms. Do not wash more than 1 dish rack at a time.
10. Close the front door fully, the wash cycle will begin automatically. The green
in-cycle light will illuminate.
9
| General | Details |
|---|---|
| Name | CHAMPION 2000 Series Door type Dishwasher |
| Make | Champion |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.84 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Oursson DW4001TD Dishwasher
FISHER PAYKEL DD24DDFTB9_N Dishwasher
BOSCH SMT6ECX00E/38 Dishwasher
Home Appliances QW-NA1CF47EI-EU Dishwasher
INSIGNIA NS-DWR3SS1 Dishwasher
BOSCH SPS4EMI61E Dishwasher
FISHER PAYKEL DD24DT2NX9 Double Dishwasher
SHARP QW-NS1CF49EI-ES Dishwasher
FOTILE BD3B-G6 Dishwasher
FISHER AND PAYKEL DD60D2HNB9 Dishwasher