CHAMPION 2000 Series Door type Dishwasher
Initial Start-up
Installation Check List
1. Remove any protective film from dishwasher. Check the interior for foreign material.
2. Make sure that the dishwasher is permanently located.
3. Make sure that all utility connections are complete.
4. Make sure that the chemical supply containers are full.
5. Make sure that the pump suction screen is in place.
6. Make sure the drain screen is clean and unobstructed by debris.
7. Make sure the scrap screen plate and scrap screens installed and firmly seated.
The screen plate is mounted in the center of the wash tank and locks in a slot on the back screen support.
8. Make sure that the spray arms are in place and that they spin freely.
9. Fully close the dishwasher door.
10. Turn hot water supply on and check for leaks in the main water supply piping connected
to the dishwasher.
! IMPORTANT !
Be sure Pressure Gauge is installed, as shown on page 6. During the initial fill, adjust the PRV to
ensure that the flowing pressure of the incoming water is set between 20-25 PSI.
Make sure the pump suction strainer is in place.
Make sure the drain screen is
unobstructed.
Make sure the scrap screen plate is mounted in the center of
the wash tank and separating the scrap screens.
Make sure the scrap screens are in place.
8
| General | Details |
|---|---|
| Name | CHAMPION 2000 Series Door type Dishwasher |
| Make | Champion |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.84 MB |
(1 votes, average: 5.00 out of 5)
Loading...
MAYTAG MDB Series Dishwasher
AEG FFB64607ZM 6000 SatelliteClean Dishwasher
FISHER and PAYKEL DW60UC2X Contemporary Builtunder Dishwasher
KINGFISHER KF1000DW Deluxe Passthrough Dishwasher
FISHER PAYKEL DD60ST4HNB9 Built Under Dishwasher
BOSCH SHX88CL5N Dishwasher
TESLA WD690MW Dishwasher
ZLINE 65286410 Monument Dishwasher
BOSCH SMS8ZCI00X Dishwasher
saco Dishwasher Whirlpool G2P DWI