CHAMPION 2000 Series Door type Dishwasher
Installation
Electrical Connections
Three Phase Connections
WARNING:
Electrocution or serious injury may result when working on an
energized circuit.
Disconnect power at the main breaker or service disconnect
switch before working on the circuit.
Lock-out and tag the breaker to indicate that work is being
performed on the circuit.
ATTENTION
A qualified electrician must connect the main incoming power to the dishwasher in accordance
with all local codes and regulations or in the absence of local codes in accordance with the
National Electrical Code.
Standard Dishwashers are shipped
from the factory for 3-phase operation.
To connect the dishwasher for 3-phase
Main Terminal Block
operation:
1. Remove the top-mounted control
cabinet cover and locate the main
terminal block in the left-rear
corner of the cabinet.
2. Refer to the Machine Electrical
Connection Data Plate located
near the main terminal block and
Main Terminal Block Location
make sure that the incoming
power supply matches the
machine's electrical requirements.
THREE PHASE
POWER CONNECTION
208-240V/60/3
3. Connect the incoming 3-phase
LINE IN
power as shown in the illustration
to the right.
L1
L2
L3
GRD
4. Re-install the control cabinet cover.
NOTE:
Refer to the next page for 3-phase to
1-phase field conversion instructions.
4
| General | Details |
|---|---|
| Name | CHAMPION 2000 Series Door type Dishwasher |
| Make | Champion |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.84 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH SGV4HTX27G Dishwasher
BOSCH SMV4ECX23E Dishwasher
BOSCH SMI4ECS28E Dishwasher
FISHER PAYKEL DD24SCTB9_N Dishwasher
BOSCH SHS53CD2N Scoop Handle Dishwasher
Haier HDP18PA Portable Dishwasher
baridi DH224 Mini Tabletop Dishwasher
FISHER PAYKEL DD24DCTW9 N Dishwasher
FISHER PAYKEL DW60UN2X2 Built-Under Dishwasher
FISHER PAYKEL baseDD24SHTI9 N Single DishDrawer Dishwasher